![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
2014-09-12, 23:22
Replacing the digitizer is not a fun task. Typically its glued to the frame. You will need some sort of industrial heat gun or a hair drier may suffice.
Then a suction cup to pull it away.
If that fails, you will need to crack the glass and pull it away bit by bit. Being extremely careful not to damage the LCD underneath.
That's from the front. You will need to open it up from the back as well so you can detach the ribbon from the old digitizer and plug the new one.
Then a suction cup to pull it away.
If that fails, you will need to crack the glass and pull it away bit by bit. Being extremely careful not to damage the LCD underneath.
That's from the front. You will need to open it up from the back as well so you can detach the ribbon from the old digitizer and plug the new one.