iNew NFC reading card problem

[mfrom]

I've tried using iNew V3 version 1.0.6,
cannot read nfc card.

Did any try using V3 updated firmware can read and write NFC card directly?


i found this phone is very great except NFC=_=

[linr76]

please us the search function.

version 1.0.6 of the firmware is the first factory firmware (dont let the numbering fool you)

NFC should be working even with this firmware, you have to make sure the contacts of the back plate match up with the phone's contacts.
also make sure the back plate is securely in place, as otherwise you will not have contact either.
on some phones it was necessary to pull the contacts out a little bit (very carefully!)

[bbq88]

...also make sure the back plate is securely in place, as otherwise you will not have contact either.
on some phones it was necessary to pull the contacts out a little bit (very carefully!)

Don't pull the pins. Lots of victims broke their pins when trying pulling them out.

Either try pressing hard on both side of the camera so as to secure the contact in place with the antenna, or stick a small piece of aluminium foil on the cover (above the antenna so as to get the pin in touch with the antenna.

[linr76]

this is why i said very carefully.
putting any kind of foil in there is just as dangerous, since if you do not pay attention you can short out the connection.
worst case you fry your nfc chip and thats even worse than breaking the pins. (pins can be fixed, a shorted out burnt chip cannot)