[Tutorial] HOW TO PORT TWRP MT6735, MT6752, MT6753, MT6795, MT6797 TWRP MT67xx tutorial

[mrsim]

@NexusTrix
thank you for the links...this is the first mediatek powered device i have had in a while so was looking forward to learning things like using this program to make TWRP for it...you spoiled my fun...LOL...no worries...would still like to know what the problem was for future reference though so if anybody does have the answer please feel free to post an explanation...thanks a lot

p.s. seems this TWRP has put the device into a bootloop with the latest firmware and an unlocked bootloader...will flash back original recovery...not sure what the problem is though

pps...seems the original recovery didn't help with the bootloop...had to flash back the full stock rom for it to reboot into the system ok...seems for now there is an issue with this TWRP.img on my device

[Heemzy]

I use a 32bit device ..after porting I noticed dat d touchscreen ain't responding...wat myt b d cause....pls help me...I will b gr8ful for dis ....I use umi hammer s
Mtk6735m

Help me......

[podge3]

Before I make a donation, is this suitable for the Cubot Cheetah?

Thanks.

[Cleopatra]

Before I make a donation, is this suitable for the Cubot Cheetah?

Thanks.

Hi podge3 !

Yes, it is suitable.

Regards

[podge3]

I just donated, thanks.

[sudd1976]

Cleopatra,

Thank you very much for all of your hard work.

I can now confirm that I have a working custom recovery and that my phone is now 100% rooted.

Amazing

[IlseG]

Cleopatra

Good evening Cleopatra,

this Nachrich is created using Google Translator,

I have your contribution How to equip (made of Cleopatra) Your MT6580 with a TWRP.

Following your instructions with templates TWRP tried on my MT8321 "captiva-pad 10-3g-communicator" Tablet (Mt6580)

Display 25.7 cm (10.1 "),

capacitive multitouch, 5pkt. display 1024x600

System Android 5.1mit the resolution 1024x600

RAM 1GB DDR3

Internal memory 8 GB Flash

Connectors: 1x micro USB,

1x Micro SD card reader to 32GB,

Headphones, 2x SIM card,

Built-in 3G module for data transmission and telephony

create and start. But the full Fuktion is not given (buttons and sliders will not work properly)

Can you tell me please a functionally ready TWRP Recovery create?

Here is my link with my release Bootimg & recovery to the directory 'Cleopatra':
[Only registered and activated users can see links Click here to register]&loginName=iglaeser

This link is protected with PIN:

Cleopatra

Please tell me what you need ???

Donation is OKay

MfG

IlseG


How to do with the donation?

[Cleopatra]

Hi IlseG !

You have already needed help on "chinamobiles.org" (24. März 2016).
Very nice your pdf & doc of my tutorial in German-language.
Unfortunately, I have no any tablet to do some experiments to install a twrp.
However, it is not so easy to install a twrp on a tablet.
Someone have had your same issue with his tablet.
A possible solution could be to change the DPI into the build.prop.
I have unpacked your stock recovery.img
I have opened the default.prop (with Notepad ++)
In the string number 128 I have found the next string :

ro.sf.lcd_density=160

You have not to change the number 160 insidedefault.prop
Instead, you have to change the next string inside your build.prop :

ro.sf.lcd_density=160

It is the same string of default.prop (inside recovery.img)
but the build.prop is inside system.img

Please send me your system.img
I can not guarantee the success, it is just a hypothesis.

Regards

[radmir]

Hello. when I open my phone iku curvy c50l (mt6735p) in recovery mode it displays an exclamation point on the Android logo man. how the solution to spend in recovery? thank you.

[Cleopatra]