![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
2013-06-12, 07:24
Files you'll need:
Instructions:
1. Switch off your phone
2. Install the drivers
3. Extract SP Flash Tool
4. Extract the Recovery and scatter
5. Run Flash_Tool.exe (Blue Box)
6. Click scatter loading and load "MT6589_Android_scatter_emmc"
8. Click the "Window" option in SP Flash tool and click "Write Memory".
9. Now a "Write Memory" tab appears, go to it, check "EMMC" in memory setting and click "Open Raw Data" and load the recovery.img.
10. Change the Begin address to 0x2d80000 and the container lenth to 0x600000; Now click "Write Memory", the tool will start searching for a device.
11. Connect your phone and let the process run..
12. Once a green circle appears, you're good to go
To access the recovery press and hold the volume + and the power button till it boots into TWRP.
Instructions:
1. Switch off your phone
2. Install the drivers
3. Extract SP Flash Tool
4. Extract the Recovery and scatter
5. Run Flash_Tool.exe (Blue Box)
6. Click scatter loading and load "MT6589_Android_scatter_emmc"
8. Click the "Window" option in SP Flash tool and click "Write Memory".
9. Now a "Write Memory" tab appears, go to it, check "EMMC" in memory setting and click "Open Raw Data" and load the recovery.img.
10. Change the Begin address to 0x2d80000 and the container lenth to 0x600000; Now click "Write Memory", the tool will start searching for a device.
11. Connect your phone and let the process run..
12. Once a green circle appears, you're good to go
To access the recovery press and hold the volume + and the power button till it boots into TWRP.
Click +Rep if someone helped you 
.
.
