+- www.chinaphonearena.com (https://www.chinaphonearena.com/forum)
+-- Forum: Phone & Tablet Root, Hack and Develop (https://www.chinaphonearena.com/forum/Forum-Phone-Tablet-Root-Hack-and-Develop)
+--- Forum: *Tech support* General Phone & Tablet Root, Hack and Develop Root IMEI NVRAM CWM TWRP BRICKED (https://www.chinaphonearena.com/forum/Forum-Tech-support-General-Phone-Tablet-Root-Hack-and-Develop-Root-IMEI-NVRAM-CWM-TWRP-BRICKED)
+--- Thread: TWRP for Amoi N828 and variants (/Thread-TWRP-for-Amoi-N828-and-variants)
TWRP for Amoi N828 and variants - MaxP101 - 2013-06-12
Files you'll need:
Instructions:
1. Switch off your phone
2. Install the drivers
3. Extract SP Flash Tool
4. Extract the Recovery and scatter
5. Run Flash_Tool.exe (Blue Box)
6. Click scatter loading and load "MT6589_Android_scatter_emmc"
8. Click the "Window" option in SP Flash tool and click "Write Memory".
9. Now a "Write Memory" tab appears, go to it, check "EMMC" in memory setting and click "Open Raw Data" and load the recovery.img.
10. Change the Begin address to 0x2d80000 and the container lenth to 0x600000; Now click "Write Memory", the tool will start searching for a device.
11. Connect your phone and let the process run..
12. Once a green circle appears, you're good to go
To access the recovery press and hold the volume + and the power button till it boots into TWRP.
RE: TWRP for Amoi N828 and variants - arielgalula - 2013-11-01
Is this recovery in English?
RE: TWRP for Amoi N828 and variants - GizBeat - 2013-11-01
(2013-11-01, 17:48)arielgalula Wrote: Is this recovery in English?Yes, it's in English.
RE: TWRP for Amoi N828 and variants - Eddy1980 - 2014-06-09
Does not work for me. I tried but when I try to connect my phone to USB the PC says "enable usb tether mode". It is for me not possible to enable this mode because I can't startup my phone.
When I power on my phone I see chinese signs and it stays on.
I can go to my root menu by pressing the poweron and volume up button.
But also here I got chinese signs wit YYDS.cn
Does anyone know a solution for me to add a new rom software to my phone?