[ROM] OUKITEL U7 PLUS - STOCK ROMS & TWRP

[Cleopatra]

OUKITEL U7 Plus - NEW stock rom V13.0_20160922



- added SuperSU-v2.78-201609011115

- added Busybox.Installer.v1.24.2


ROM STEPS :

1) Install the TWRP (the old version available on Needrom)
2) Download the "Oukitel_U7_Plus-Update_V13.zip" at the next link :

http://www.needrom.com/download/u7-plus-v13-0_20160922/

3) Copy & paste "Oukitel_U7_Plus-Update_V13.zip" into microSD.
4) Reboot into twrp recovery.
5) Make a full backup of the stock rom (Boot, System and Data) into microSD.
6) Make a backup of NVRAM separately into microSD.
7) Tap on "WIPE" (main screen of twrp).
8) Tap on "Advanced Wipe".
9) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard.
10) Swipe to Wipe.
11) Return to the main screen of twrp.
12) Tap on "INSTALL".
13) Tap on "Select Storage" and tap on "Micro SDCard".
14) Tap on "Oukitel_U7_Plus-Update_V13.zip".
15) Swipe to confirm Flash.
16) When installation is finished, swipe to reboot.
17) Enjoy.

WARNING :

DO NOT INSTALL the next OTA update :



The reason for this is very simple : the TWRP interfere with OTA installation.
As soon as possible I will try to find a solution for the V19.0_20161124

NEW TWRP 3.0.2.1 (based on V13.0_20160922) :



TWRP STEPS :

a) Tap on "Settings" -->"About phone" --> "Build number".
b) Tap 7 times on "Build number".
c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging".
d) Download the next version of SP Flash Tool :

http://www.mediafire.com/file/u3iepolka1...5.1628.rar

e) Download the NEW TWRP 3.0.2.1 at the next link :

http://www.mediafire.com/file/39h9pf16h1....0.2.1.rar

f) Turn off the phone.
g) Open SP Flash Tool, load the scatter file and click on Download.
h) Connect your phone to your pc with USB to start the flash process.
i) When it finished, press "volume up" and "power" buttons simultaneously.
j) Select the first white line with volume up.
k) Press volume down to confirm.
l) Enjoy.

[brz]

I did the tutorial, I'm waiting for the boot, it seems that it worked but I think it did not work and will get stuck at boot.

[brz]

edit:
It worked

[ANDROIDXFOREVER]

hio i want tutorial for install TWRP e root for oukitel u20 plus mediatek mt6737T tnx for all help

[Cleopatra]

OUKITEL U7 Plus - NEW stock rom V20.0_20161220



ROM INSTALLATION STEPS :

1) Download the latest version (5.1648.00) of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

2) Download the stock firmware V20.0_20161220 :

https://mega.nz/#!C49WQbbT!YjPK66SNtsKrV...RDMPhDfBcs

3) Flash the firmware with SP Flash Tool (Download Only mode).


OUKITEL U7 Plus - NEW TWRP 3.0.3



TWRP INSTALLATION STEPS :

a) Tap on "Settings" -->"About phone" --> "Build number".
b) Tap 7 times on "Build number".
c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging".
d) Download the latest version of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

e) Download the NEW TWRP 3.0.3 at the next link :

http://www.needrom.com/download/u7-plus-twrp-3-0-3/

f) Turn off the phone.
g) Open SP Flash Tool, load the scatter file and click on Download.
h) Connect your phone to your pc with USB to start the flash process.
i) When it finished, press "volume up" and "power" buttons simultaneously.
j) Select the first white line with volume up.
k) Press volume down to confirm.
l) Enjoy.

[Cleopatra]

Have installed this and taken a bakupp. But it's not possible to do a restore from bakupen. it just gets error every time I try. so iriterad so it just enough.

Above all : "Hello" (and "Regards" at the end of the post).

Questions :

1) Build version of your stock firmware ?
2) When you restore the backup, please tell me what you do ?

Regards

[Cleopatra]

It is v20 in my u7plus

I do a wipe and try to restore the backup from the SD card, as I have always done with TWRP in My samsung s3 9035

---

Have installed this and taken a bakupp. But it's not possible to do a restore from bakupen. it just gets error every time I try. so iriterad so it just enough.

Above all : "Hello" (and "Regards" at the end of the post).

Questions :

1) Build version of your stock firmware ?
2) When you restore the backup, please tell me what you do ?

Regards

It is v20 in my u7plus

I do a wipe and try to restore the backup from the SD card, as I have always done with TWRP in My samsung s3

Hello

Backup steps :

Check marks only on Boot, System and Data.

Restore steps :

1) Tap on "Wipe".
2) Tap on "Advanced Wipe".
3) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard.
4) Swipe to Wipe.
5) Return to main menù of TWRP.
6) Tap on "Restore".

Regards

[Hazuki]

Hello Cleo, thank you for your hard work. I would like to ask you something.
To flash a stock rom do I have to unlock the bootloader for the rom to work?

I am asking because I was on the latest android 6 firmware and the device asked me to upgrade to Nougat. The upgrade failed and I have tried to upload with sp flash tool the nougat firmware formating the flash but nothing. I tried to downgrade, also nothing. I can go to fastboot mode and into recovery, I can flash the twrp images that you have made but for fcks sake I cannot boot the device. So I have concluded that something in the bootloader don't let me to boot the device because the sp flash tool finishes without error and from the recovery I can mount the system partition.

Yesterday I have tried to unlock the bootloader with fastboot, I could sent the command (fastboot oem unlock) to the device, the device asked me to press vol + to unlock the bootloader but immediately fails. I have read that I need a code from the company to unlock the bootloader. Have you tried to unlock the bootloader with fastboot? Did it need a code?

Because I wouldn't expect the nougat update to fail I haven't enabled the oem unlock option and the usb debugging options from the system ui when it was working fine.

[Hazuki]

Hello Cleo, thank you for your hard work. I would like to ask you something.
To flash a stock rom do I have to unlock the bootloader for the rom to work?

I am asking because I was on the latest android 6 firmware and the device asked me to upgrade to Nougat. The upgrade failed and I have tried to upload with sp flash tool the nougat firmware formating the flash but nothing. I tried to downgrade, also nothing. I can go to fastboot mode and into recovery, I can flash the twrp images that you have made but for fcks sake I cannot boot the device. So I have concluded that something in the bootloader don't let me to boot the device because the sp flash tool finishes without error and from the recovery I can mount the system partition.

Because I wouldn't expect the nougat update to fail I haven't enabled the oem unlock option and the usb debugging options from the system ui when it was working fine.

Yesterday I have tried to unlock the bootloader with fastboot, I could sent the command (fastboot oem unlock) to the device, the device asked me to press vol + to unlock the bootloader but immediately fails. I have read that I need a code from the company to unlock the bootloader. Have you tried to unlock the bootloader with fastboot? Did it need a code?

[Cleopatra]

@Hazuki :

Please tell me the Build number of your phone.
Settings-->About phone-->Build number.

a) What version of SP Flash Tool do you use to flash the rom ?
b) What version of Windows OS do you have installed ?
c) Do you have a laptop pc or a desktop pc ?

You NO need any code from the company to unlock the bootloader.

STEPS TO UNLOCK BOOTLOADER :

1) Install (click always YES) "adb-setup-1.4.2.exe" from the next links :

http://www.mediafire.com/file/2df821420x..._1.4.2.rar

2) Connect your phone to your pc with USB cable.
3) Open CMD (command prompt).
4) Type the next command :

adb reboot bootloader (and press enter)

5) Type the next command :

fastboot getvar all (and press enter)

6) You should see "bootloader unlocked : no"

7) Now type the next command :

fastboot oem unlock (and press enter)

8) Press volume up (into your phone) to confirm to unlock the bootloader.
9) You will see in the CMD prompt the next messages :

"Start unlock flow", and when it will be finished, you will see "OKAY".

10) Now type the next command :

fastboot getvar all (and press enter)

11) Now you should see "bootloader unlocked : yes"


Regards