[Question] Pepsi P1S Bootloop

[Blueforcer]

Hello, i have a new Pepsi P1S.
with the Stock firmware everything works great (exept the bloatware ) then i have flashed the modded halo 7 ROM. The phone boots up at freeze at different points...sometimes at the boot animation. sometimes in the Android menu. When the phone boots up completely (After round about 10 trys) it stays on forever if it is in standby (Screen off). But after some touches in the menus etc it freezes again and reboot by itself. Over and over again.
Then i flashed TWRP and make a factory reset...but no difference,
Then i realized the phone freeze in TWRP too. but not during full wipe.
at last i have flashed the original rom..but same error here..

What could I do? Its a birthdaypresent for my GF this wednesday

[Cleopatra]

Hi Blueforcer !

I will help you because you have written that the Pepsi is a birthday present.
You touched my heart and soul

Follow carefully the next steps :

1) Download and install the next driver for Windows :

[Only registered and activated users can see links Click here to register]

2) Download the next version of SP Flash Tool :

[Only registered and activated users can see links Click here to register]

3) Unzip SP Flash Tool and click on "flash_tool.exe"

4) Click on "scatter loading" and load the scatter file inside "Halo_7_Mod_2.16"

5) Choose the option "Format All + Download" and click on "Download" (green arrow).

6) Connect your phone to your pc with usb cable.

7) be patient untill the yellow progress bar will be at 100%

[Blueforcer]

Thanks, but this change nothing. my error is still there.
Isnt it the same procedure as flashing any ROM? I have try 2.10 2.16 and the original ROM

[Cleopatra]

At first, try to flash the original rom (Format All + Download).

[Blueforcer]

i have done it already...
Even with the original rom i have this issue

[Cleopatra]

i have done it already...
Even with the original rom i have this issue

Tell me one thing :

When you press the power button, what happens ?

[Blueforcer]

It start

[Cleopatra]

It start

Well ... then the problem is solved.

[Blueforcer]

Have you read my issue correctly? xD
the P1S freeze and reboot..over and over

[Cleopatra]

Have you read my issue correctly? xD
the P1S freeze and reboot..over and over

You should learn to write more correctly.
In your post (Post: #7) ... you have written "It start" (with a smile).
I have interpreted it like a success !
The proper form should have been the next :

"It start (without smile), but it freeze and reboot".

Guys ... you should learn to describe in detail your issues