I bricked my Inew v3. Help!!

[francisquino]

Hello.

I had a V3 and was very happy. I updated to KitKat.

Some weeks ago it began to reinit. I saw a KitKat rom in Needroom:

[Only registered and activated users can see links Click here to register]

Installed it with SP Flash Tool. When trying to recover a TWRP backup I realice that Recovey Boot is CWM and can't recover.

With Mobileuncle install [Only registered and activated users can see links Click here to register]

But when I start in Recovery Mode (Power + Vol up) it start normally.

I had forgotten backup the Imei, with MtkDroid tools can change them. But I can't get a good connection. I modify Baseband, but the only I get is it can't connect with the company.

Trying to repair I made a Factory Reset. From then I can't power on. Nothing happens.

If I connect with the computer and SPFlash Tool I can see the model. I tried Formatting+Donwload the rom, but It shows an error. I tried with the official rom form inewphone.com. But I get another error.

[Cleopatra]

Hi francisquino !

It was happened to me too, your same problem some weeks ago.
Which version of SP Flash Tool have you tried ?
Have you tried other version of SP Flash Tool ?

[Tommygr]

Hi francisquino !

It was happened to me too, your same problem some weeks ago.
Which version of SP Flash Tool have you tried ?
Have you tried other version of SP Flash Tool ?

Which one do you recommend?
I also have the same problem. The phone keeps closing by itself and all i can do is to flash again. i was coming from 1.0.8. Do i need to flash with this one again to get it working?

[Cleopatra]

Try with these versions (begin from the number 9):

1)SP_Flash_Tool_3.1216.02.zip
2)SP_Flash_Tool_3.1222.00.zip
3)SP_Flash_Tool_3.1224.01.zip
4)SP_Flash_Tool_3.1238.5.zip
5)SP_Flash_Tool_3.1304.0.119.zip
6)SP_Flash_Tool_3.1312.0.139.zip
7)SP_Flash_Tool_3.1328.0.183.zip
8)SP_Flash_Tool_5.1343.01.zip
9)SP_Flash_Tool_v5.1452.00.000.rar

If none of these will help you, I have in mind another solution :-)

[francisquino]

At last I could make the phone run!!!!

With SP Flash Tool I could flash the [Only registered and activated users can see links Click here to register] rom. I can't remember if Firmware upgrade or Download.

It showed the inew first logo and the animation. But no more. Touching the buttons I got into the Recovery mode. I did a Wipe and then it started ok.

I think the problem is when I tried to install a TWRP recovery with SP Flash Tool. I didn't know the diference between Firmware upgrade and Download: In one case you have to check all, in the other you don't need to check all of them (I can't remember whith which optioin you have to check all).

[Cleopatra]

Usually, the default method to wipe in recovery mode is the following:

1)Wipe data/ factory reset.
2)Wipe cache partition.
3)Wipe dalvik cache.
4)Format /system.
5)Flash your Rom or zip.

:-)