Doogee dg 550 sim and rear camera problem.

[Souldefiler]

[Athos]

Have the CDC drivers installed? you have to force the phone to shut off. Close mauimeta then re-do the process. Connect in META Mode-Reconnect-Plugin. The phone will really be stuck at the Doogee logo the entire time.
Forgot to mention it gets stuck the first installation.

Hmm, was it working fine when you got the phone?

[Souldefiler]

Everything worked fine man. My stupidity caused this. Wanted some new roms like everyone else. I did this with many phones never had problems until now. if i knew this would happen i wouldnt touch my phone att all. I will redo proces with maui meta again and i will reply with results in short time. DO i need to get battery outside maybe?

---

Ok did the same proces again and now when i run maui in administrator. Then choose connect smartphone in meta mode. then click on reconnect , then connect phone via usb (switched of) . What happens is that i hear sound that is connected then sound that is disconected and i get battery charging logo that phone is charging.

[Athos]

do that thing with usbdeview again. switch your phone on, and install pdanet drivers.
Switch it off then redo the maui meta connection. Keep device manager open in the background so you can see if cdc drivers install correctly.

Hang on, Not sure you need to be going through this method though. Have you tried what cookiedough said?
Format+Download of stock ROM?

[Souldefiler]

i have instaled pda net when i connect my phone pda nete message pop out and says connect your device to pda net. my usb drivers in device manager/ports have 2 drivers, mediatek vcom usb and preeloader but they have warning triangle above them. Regardless to that i manage my sp flash tools working. U suggest me to uninstal driveras with usb dewiev and instale them again. I tried that many time but there as always that warning sign. I,m using windows 8.1.

---

do that thing with usbdeview again. switch your phone on, and install pdanet drivers.
Switch it off then redo the maui meta connection. Keep device manager open in the background so you can see if cdc drivers install correctly.

Hang on, Not sure you need to be going through this method though. Have you tried what cookiedough said?
Format+Download of stock ROM?

No i didnt. Ok il try that if i need to. So basicly i need this. open sp flash tools, load scater from stock rom then click format then connect phone without batter? or there is a another sequence. I never did format before.

[twistyplain]

I don't think its a good idea to flash a phone whose vcom drivers and preloader drivers are unavailable.

Please try to install those drivers properly before using SP Flash Tools.

[Athos]

its fine, twistyplain. With some, its the only way to get drivers working on win8 and 8.1
its how it is -- with exclamation marks -- when installed by manually adding legacy drivers.
com ports are assigned to the preloader and vcom permanently.

[Souldefiler]

Ok story goes like this. Listen my phone allready came with 4.4.2 android. Everything worked just fine i did backup trough twrp normaly. Instaled cynogen mod 11 ported form iceman on needrom camera didnt worked. So i restored my backup and everythin worked fine again. I wanted to change phone memory with metheos app to 7,1gb and i accidentally formated that precious backup. When i flashed stock rom again sims where gone and rear camera also didnt work. Since windows 8.1 that i had on my pc caused so much trouble with drivers to me. I instaled windows 7 ultimate again hour ago and so far what i have on windows 7 is: Pda net installed successfull and pc recognize my phone as doogee dagger550. Also in device manager adb interface is recognized. Only in device menager under other devicec i have unknown device wit yelow warning triangle. My imei numbers are gone. Phone state atm is like this: Android stock 4.4.2 in, rear camer dont work, both sims are undetectable and imei nubmers are gone. What is my next step brother. Please help me and i will own you big time.
P.S. i have coppied all files drivers,sp tools, etc etc on my d drive. so i have everything.

---

This how my mtk droid tools looks like when i connect my phone. [Only registered and activated users can see links Click here to register]

---

No matter what i do i still have that error 10 in device menager after i install vcom usb and preeloader dirvers. Downloaded ultimate mtk drivers from this forum installed everything inside pda net everything. Nothing when i enter flash tools it gives me broom errors. I just want to restore my imeis i have them on sd and on computer saved from orginal rom that worked. I dont care about camera i just want to be able to use sims.

---

I manage to get sp flash tools working bro flashed stock rom from doogee now i still dont have camera but i have this message my network is showing invalid imei. I will try to restore it now.

---

Now when i turn my wifi on it gives me navram error 10 and i cant connect to wifi. From this i need to root a phone first and instal custom recovery. I need that for trying to restore my navram backup i have saved on my computer. Last time i used v -root and instaled latest twrp for doogee from need rom. Should i do the same or you guys have another suggestion? Waiting for your reply. I em sitting for 2 day in front of my computer now damn.

---

Damn guys i manage to restore my imeis finally aaaaaaaaaaaaaaa after 2 days. Now only issue is my back camera. I would love to fix that to if anyone knows solution please let me know. And thank you all for help.

[Souldefiler]

FIxed everything my phone is back to life again. Thx everyone once again. Peace.

[SunSatION]

FIxed everything my phone is back to life again. Thx everyone once again. Peace.

Hi,

Would you mind if I ask how did you fix your rear camera issue?

Thanks