[Custom Recovery] iNew V3 CWM 6.0.4.4 Full Touch

[Mouratti]

I Can't make that CWM recovery the default recovery

Ok I got it, need to be flash...my fault its done.

now i have the zip file for 3.5GB storage, but i can't find with this cVW?

[Burs]

I think you've landed here on a wrong foot. This thread is about CWM and not ROM flashing. First you asked "how do I install this" (and by "this" we all assume "CWM" since the thread is about CWM). Then later you asked about flashing (CWM?) through Mobile Uncle Tools, for which you also got an answer. After that you're mentioning some zip file (rom?) which no one before mentioned in this thread, and you wanted to flash it through Mobile Uncle Tools (?), and that is not possible (you flash it through SP Flash Tools or CWM). And now in the last post, mods also come into question. So you see, you're jumping all around and we can't help you if you're not specific at what you're trying to achieve. Also your English is hard to decypher and it's hard (at least for me) to see the question. I'm not an English native speaker either, but anyway... It not easy to see at first what is bugging you.

Now you're lost because you're doing advanced stuff, and you admitted you're a newbie. That's a dangerous combination. Everything what you're trying to do here (or at least what I think you're trying to do), is explained in other threads specificaly dedicated to your issues. So please ask those questions there, and you'll get your answers sooner. And everyone else will know you're talking about the thread subject and not something else.

Go [Only registered and activated users can see links Click here to register] and choose your subject. Then we'll try to help you.

[Mouratti]

Sorry for english!
I solve yet.
I try to install CVM but im not doing, the last step that was flash. So every reboot dont have the CVM.
Then before try to do this i "lost" the system,(wipe all data) that's why im asking for a rom.
Then i flash the CVM, then install the rom, and change the partition size.

Thanks again and so sorry for my complicated post.
You help me a lot.

[GeekGirl]

Hi Mouratti,

Here i are the easy steps and included files needed to flash V.1.0.3 + root + 3.5gb + cwm 6044 (tested)

* be sure that your battery is charged and the usb cable is good quality

1. turn off your phone and remove any cables
2. remove the battery and insert it again but leave your phone off
2. Start Sp Flash Tool (in windows 7 or above as administrator important)
3. click Scatter-Loading (button on the right)
4. go to the V.1.0.3+root+3.5gb+cwm 6044 folder and select MT6582_Android_scatter.txt
5. click firmware->upgrade button on top
6. connect an Usb cable from your mobile to the pc
-. if it asks for the driver then get and select it (usb vcom driver)
7. now you see some action going on in the bar below (if not then there is some problem)
8. wait a few minutes until you get a green circle dialog/popup saying Download OK
9. remove the usb cable and remove the battery then put it back in and turn on your mobile

Download of needed files: (included the files from Gizbeat)
[Only registered and activated users can see links Click here to register]

Sorry for english!
I solve yet.
I try to install CVM but im not doing, the last step that was flash. So every reboot dont have the CVM.
Then before try to do this i "lost" the system,(wipe all data) that's why im asking for a rom.
Then i flash the CVM, then install the rom, and change the partition size.

Thanks again and so sorry for my complicated post.

[Quad]

Is it correct that i can't mount my internal SD card?
When i try to mount the internal or external SD card i got the following errors:
E: Can't mount /sdcard/ (this is what i get with SDcard)
E: Can't mount /emmc/ (this is what i get with internal sdcard)

The normal SD card i can understand because i don't placed an external SDcard, but the internal SDcard should be possible to mount, i guess?

I am running on stock ROM v1.0.4.

[bbq88]

Thanks very much for the new recovery tool.

Before installing it, would you teach me how I can get back to my original tool after installing this new one.

[NexusTrix]

Well the stock ROM for your phone should be having the original recovery. Otherwise you can take it from any backup you have through MTK Droid Tools. You would be flashing it back the same way you flashed the CWM.

[Quad]

Is it correct that i can't mount my internal SD card?
When i try to mount the internal or external SD card i got the following errors:
E: Can't mount /sdcard/ (this is what i get with SDcard)
E: Can't mount /emmc/ (this is what i get with internal sdcard)

The normal SD card i can understand because i don't placed an external SDcard, but the internal SDcard should be possible to mount, i guess?

I am running on stock ROM v1.0.4.

Sorry for the kick, but doesnt have anyone the same problem?

[cityfun]

Quad, iNew changed the phone partition layout in ROM V1.0.4, there is no longer an internal SD card, all the space is unified into a single internal phone storage of 13GB.

So you will only have 2 spaces, internal storage and the external SD card.

[Quad]

Yes i know, but what is the right way to mount my internal storage in CWM? Because like you can see i got those two errors.