2014-10-21, 18:15
(This post was last modified: 2014-10-22, 05:38 by cr4zychriss.)
Hey guys, im having trouble building CWM or TWRP for my frypan.
I want a touch version of one of the 2 .
This is my phablet:
Full specs .
Tryed using CTR but failed . (see attached pics), Tryed MTKDT but that failed too saying: --- ERROR :Recovery doesn't match by the size !
Tryed making it manualy using boot from phone and Carliv's ports and that failed also( touch and nontouch vers).
After reading some more, i manualy unpacked my boot.img and recovery.img and in default.prop i see secure flags are on.
So i tryed seting them to 0 and debugging to 1 repacked and when flashed i get different size and bootloop. Also when i try making it manualy with MTKDT.
Im out of solutions and i ask for your help and guidance.
Packed
KK_Original_scatter.txt (Size: 7.45 KB / Downloads: 21)
parts.txt (Size: 5.06 KB / Downloads: 15)
Thanks in advance !
=== EDIT ===
are the images i made and test and all failed both JB and KK Original Patched CWM Packed Unpacked and Repacked.
Forgot to mention this shit has a Mediatek Systemon Chip (SoC) MT6582 wich is actualy MT8312 or viceversa.
I want a touch version of one of the 2 .
This is my phablet:
Code:
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
Hardware : MT6582 (MT8312 is Fake!)
Model : AX4Nano
Build number : AX4Nano_KK_SV7.0
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V35.P4, 2014/06/27 14:22
Kernel v : 3.4.67 (weiw@pnserver-66) (gcc version 4.7 (GCC) ) #1 SMP Mon Aug 25 16:11:20 CST 2014
My device is a ext4 with 800 x 480 pixel display emmc partition.
Tryed using CTR but failed . (see attached pics), Tryed MTKDT but that failed too saying: --- ERROR :Recovery doesn't match by the size !
Tryed making it manualy using boot from phone and Carliv's ports and that failed also( touch and nontouch vers).
After reading some more, i manualy unpacked my boot.img and recovery.img and in default.prop i see secure flags are on.
Code:
ro.secure=1
ro.allow.mock.location=0
persist.mtk.aee.aed=on
ro.debuggable=0
persist.service.adb.enable=1
ro.adb.secure=1
So i tryed seting them to 0 and debugging to 1 repacked and when flashed i get different size and bootloop. Also when i try making it manualy with MTKDT.
Im out of solutions and i ask for your help and guidance.
Packed
KK_Original_scatter.txt (Size: 7.45 KB / Downloads: 21)
parts.txt (Size: 5.06 KB / Downloads: 15)
Thanks in advance !
=== EDIT ===
are the images i made and test and all failed both JB and KK Original Patched CWM Packed Unpacked and Repacked.
Forgot to mention this shit has a Mediatek Systemon Chip (SoC) MT6582 wich is actualy MT8312 or viceversa.