THL T11 Bricked

[dbgodier]

THL T11 brick, okay so this is my problem, I got a brand new THL T11, rooted it and started using it, I used droid tools to do a backup and have the scatter files and all, on the second day I had it it started vibrating at random and i couldn't do anything on it so I booted into recovery(stock) and cleared cache, this didn't do it so after trying to use it again I rebooted back into recovery and selected reset, when I executed it my phone bricked, I cannot read it on Mtk Droid Tools and it won't connect to SP FFlash tools, i was able to rebuild boot but droid tools tells me that the recovery img is the wrong size, so i decided to use fastboot, which I can get into since I have no recovery, in fastboot I can't format recovery because it says formatting is not supported for filesystem 'raw data', so I am looking for ideas and instructions get these partitions properly formatted so I use flash tools to get this thing working again.

Any help appreciated

[PMoto]

Uninstall VCOM drivers from PC, and reinstall them.
Open SP flash tools, choose scatter file to flash as usual... when ready press download.
Plug phone with cable. Flash starts? ok, if not, turn battery out and in... should work and flash should start.

[Sniper47]

In addition to what PMoto wrote, there is a stock ROM for THL T11 at needrom and Khonshu posted CWM recovery in THL T11 forum.

[dbgodier]

Thank You very much for your answer, it some time to finally get it right but my phone is back up and running!!!!!!!!!

Uninstall VCOM drivers from PC, and reinstall them.
Open SP flash tools, choose scatter file to flash as usual... when ready press download.
Plug phone with cable. Flash starts? ok, if not, turn battery out and in... should work and flash should start.

[Sniper47]

What exactly fixed the phone? Did you flash stock ROM? Flash backup you made with MTK Droid Tool? Please report so others can be helped in the future.

[dbgodier]

Sorry, I should have been more detailed, I first did the volume drivers, which it turned out I didn't even have installed properly, I tried restoring from my backup made on mtk tools with no luck kept getting errors and it wasn't complete, I eventually went to need rom and downloaded the stock THL t11 rom and that one I loaded into sp flash tool. After that I went back to the mtk tools and had to restore the imei's through there and installed khonshu's CWM with the tools. Now everything appears stable though today with a little help from my son, my spanish is bad, I should get my sincere moved from my s3 to the T11, thanks again for all your help it made things easier.

[dbgodier]

Today I will make a new backup with mtk tools for future use.

---

Sorry my keyboard changes some inputs and I miss it when working from my tablet, corrections to my post are here, 1 - volume is Vcom, 2 - and need rom should be needrom, 3 - sincere is sim card

[PMoto]

Good. I'm happy it worked for you, as it worked for me either in my N9002.

[misterwood]

hello, I lived the same story with my zp998 during a flashing, in fact i removed the battery during the flashing, forbidden. Impossible to restart the phone , locked on Zopo logo, impossible to connect it with SP flash-tools or other MTK software, device not recognized by the driver (even multiple uninstall and re-install, on win XP & Win 7. How long times, may be 20 days, finally lost for lost after reading a post on a russian forum, I tested : dismantled completly the phone, connect it to the PC with battery plugged and I made short circuit between 3 test point ( golden pin on the PCBA) and the phone ground ( 1 by 1). Suddenly I saw the SP Flash running, safe !!!. I known it's a dangerous manipulation but when you a beautiful black brick,...

[carcaca]

Here did you get the vcom drivers?
Can you give me a link?
Thanks.