|
Who's Online
|
| There are currently no members online. |
|
Thread Rating:
- 7 Vote(s) - 4.29 Average
- 1
- 2
- 3
- 4
- 5
|
[Innos D6000] root gapps temporary TWRP custom recovery how to tutorial guide
|
Posts: 4
Threads: 0
Joined: 2015-09-27
Points:
49
Reputation: +4
2015-09-28, 06:02
(This post was last modified: 2015-09-28, 06:18 by OC-Freak.)
(2015-09-28, 04:43)vladakster Wrote: You have to instal some ADB interface (like ADB minimal) and then in terminal
type command: fastboot oem unlock-go (while you are in download mode).
After that, reboot the phone and run Run_test.bat
Good luck!
Thanks!
That got me further. Actually managed to install gapps, but after rebooting the phone is super slow and superhot, and battery draining like crazy. And no google apps will start, clicking google play starts it and then it closes again before it loads. Same with gmail, starts, but at the step to type in my email adress it exits.
Bummer, I'll try from scratch again.
Even tried disabling the "unlocked bootloader" and dev options to see if it was some check in gapps for that causing the issues.
haha, after flashing my phone in QFIL it is now dead, no signs of life. When connecting it to my computer it opens a lot of drives that my computer insists needs to be formatted.
And QFIL fails with Download fail: Failed to switch to emergency download mode, "Download fail: Switch to EDL FailFireHose Fail" message.
Flashed it in QFIL 3 times earlier with no issues.
Posts: 122
Threads: 6
Joined: 2015-08-31
Points:
1,297
Reputation: +86
(2015-09-28, 04:43)vladakster Wrote: (2015-09-28, 00:41)OC-Freak Wrote: After installing the pdanet drivers I got further and phone asks for permissions when I connect it.
The bat file now detects the phone as well, but after the "*******...... bootloader" line the phone reboots and when I push a key to continue it errors out.
Guess I'll just hope for innos to release international ROM, as the only thing I need is Gapps. I don't need unlocked bootloader or TWRP for anything else.
You have to instal some ADB interface (like ADB minimal) and then in terminal
type command: fastboot oem unlock-go (while you are in download mode).
After that, reboot the phone and run Run_test.bat
Good luck! You've had success?
Posts: 2
Threads: 0
Joined: 2015-09-28
Points:
24
Reputation: +3
hi, all
TWRP files for firmware version 5.1.1 does not work on firmware 5.0.2
here you can download the files for firmware 5.0.2 and 5.1.1:
another forum
xitix and GizBeat like this post
Posts: 3,182
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3636
(2015-09-28, 16:36)jemmini Wrote: hi, all
TWRP files for firmware version 5.1.1 does not work on firmware 5.0.2
here you can download the files for firmware 5.0.2 and 5.1.1:
another forum
Thank you @"jemmini". Adding to OP and mediafire mirror.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 3,182
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3636
Tutorial modified. I ran "run_test.bat" in bootloader/fastboot mode (since I was there anyway to unlock bootloader). Some users seem to have had success with running it while booted into Android as well. Should work either way. Pick your poison.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 12
Threads: 2
Joined: 2015-09-06
Points:
150
Reputation: +10
(2015-09-28, 10:43)GottaGetX Wrote: (2015-09-28, 04:43)vladakster Wrote: (2015-09-28, 00:41)OC-Freak Wrote: After installing the pdanet drivers I got further and phone asks for permissions when I connect it.
The bat file now detects the phone as well, but after the "*******...... bootloader" line the phone reboots and when I push a key to continue it errors out.
Guess I'll just hope for innos to release international ROM, as the only thing I need is Gapps. I don't need unlocked bootloader or TWRP for anything else.
You have to instal some ADB interface (like ADB minimal) and then in terminal
type command: fastboot oem unlock-go (while you are in download mode).
After that, reboot the phone and run Run_test.bat
Good luck! You've had success?
Yes, but...
Lots of troubles with GAPPS (impossible to sign in), applications just refuses to open, can't read my messages and emails...
I recommend you to wait for a while.
You like this post
Posts: 21
Threads: 3
Joined: 2015-09-22
Points:
228
Reputation: +20
I am still unable to get QFIL to update the ROM, sometimes it doesnt even find my phone...
You like this post
Posts: 12
Threads: 2
Joined: 2015-09-06
Points:
150
Reputation: +10
(2015-09-29, 03:32)shisaya24 Wrote: I am still unable to get QFIL to update the ROM, sometimes it doesnt even find my phone...
Definitively wrong drivers. Try to find some driver cleaner app to wipe any remaining traces of previously installed ones. After a good cleaning try again!
On the other thoughts, I think you'll be a happier with a stock ROM 
Posts: 4
Threads: 0
Joined: 2015-09-11
Points:
44
Reputation: +0
I'm also having issues with the GAPPS can you please report some working GAPPS. The second link you provided does not work and the first is not 64 bit
Posts: 3,182
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3636
See the current link. The Open Gapps installed and worked fine for me, but have provided the well respected fitsnugly gapps.
You like this post
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
[Innos D6000] All current ROMs download Innos D6000 ROM |
GizBeat |
48 |
50,313 |
2022-06-20, 03:55
Last Post: Mieke
|
| |
TWRP 3.0.2 innos d6000 android 6.0.1 |
kluknawa235 |
4 |
4,850 |
2019-06-17, 13:58
Last Post: t-oster
|
|
[Question] Help please - D6000 - Cannot escape factory default - In Chinese! |
NeverSurrender |
0 |
2,337 |
2018-06-25, 18:40
Last Post: NeverSurrender
|
| |
[Innos D6000] ROM PC flash tutorial (wire brush) |
GizBeat |
30 |
39,555 |
2018-05-01, 06:20
Last Post: nathanzahra
|
| |
Innos D6000 QCN/NVRAM |
rygi25 |
14 |
6,498 |
2018-01-08, 00:30
Last Post: rygi25
|
Users browsing this thread:
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
