[Tutorial] Build your own CWM recovery

[Alpa]

PROGRESS REPORT.

Ok. I was able to go as far as creating the ROM_0 file. Now back in MTK Droid Tools 2.4.8 when I hit Process File ROM_ from Flash Tools I get:
- preloader.bin - The signature isn't found!
- ERROR of a signature, ROM file is read from phone incorrectly!
- task end with ERROR

What am I doing wrong?

Thank you
Mike

i think u have to do it with the green box shown in the left bottom dialog box.

try ro hit the button "root", let it run for a while, if it change to green , then proceed to process the file, if not, u should see some wording shows on the right hand side of the dialog box, saying something like "root shell temperatelly permited", then disconnect the phone, then reconnect the phone, then u see the yellow box change to green box, then proceed to process.

Thanks Steven, but I already had tried that trick.
   

---

Now just to dispel some confusion:

1. If I create a ROM_0 file by extracting ONLY the recovery.img portion from the rom, the result is what I posted at post #35.
2. If I create a ROM_0 file by extracting the WHOLE rom (with Flash Tools), I don't get the "preloader.bin - signature isn't found" message, but in the end the result is the one posted at post #36

Mike