Marshallow 6.0.1 is here

[stevejc]

OK, I found this on the another forum forum from user daemonpnz

But the phone must reboot in bootloader !!! so Don't know if you can achieved this !!

Unpack the contents of the attached archive : [Only registered and activated users can see links Click here to register]

Run QFIL, select Flat Build and specify the paths to the files:
Click "Browse" and select the path to the file "prog_emmc_firehose_8936.mbn" in the folder with the
firmware.

Click on the "Load XML" button and select the files "rawprogram_unsparse.xml" and "patch0.xml".

Transfer the phone to the bootloader mode (press the power buttons simultaneously, vol+ and vol -).

The phone should be defined in QFIL as a COM port of Qualcomm.

Now you can start the firmware by clicking Download.