[ROM] Vernee Apollo X - STOCK ROM and TWRP

[Cleopatra]

Hi   

Sorry for the urge.
Your steps are very clear, really.
Thanks for your warning, but I live in a very small town and I do not know anyone who can help me improve my Vernee Apollo X.

Follow the steps I did, with figures.
Your installation steps from 01 to 08 have all gone ok. See figure 01.


At step 09 everything is ok. See figure 02.


Steps 10, 11 and 12 ok. See figure 03.


From this step begin the problems. See figure 04.


If I turn off my phone again, and enter into recovery mode, the messages in figures 03, 05 and 06 are shown.



Please help me!  

QUESTIONS :

1) Why do you have put SP Flash Tool onto C:\2017_SU-BU folder ?
2) Why do you have put the twrp onto C:\2017_SU-BU folder ?
3) Why do you have unlocked the bootloader ?

You did NOT follow my suggestions (installation steps)

SP Flash Tool, twrp and SuperSU/BusyBox must be into separate folders.


I have seen the screenshot about your stock recovery.
You have installed the next stock rom :

ro.build.version.incremental=1493198123
ro.build.date=2017-04-26 17:17:06 CST


NOW please follow carefully the next steps :

1) Save onto your pc any pictures/videos made by you (inside the phone).
2) Connect your phone to the pc via USB cable.
3) Open the CMD promt of Windows.
4) Type the next command :

adb reboot bootloader (and press Enter).


5) When you see "fastboot" white line, type the next command :

fastboot oem lock (and press Enter)


6) Press the volume up button (on the phone) to start the lock action.
7) Be patient until your phone will start onto normal mode.
8) Follow the setup wizard.
9) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.


And God help us ...