[Question] Vivo Y28 Not Switched ON after Flash ROM

[Cleopatra]

@karthik.jagan :

Hello !

STEPS :

1) Download the next stock firmware :

[Only registered and activated users can see links Click here to register]

2) Download the next version of SP Flash Tool :

[Only registered and activated users can see links Click here to register]

3) Turn off your phone.
4) Open SP Flash Tool.
5) Load the scatter file inside stock firmware folder.
6) Select "FIRMWARE UPGRADE" option (on SP Flash Tool).
7) Click on Download.
8) Connect your phone to the pc with usb cable.
9) When flash process finished (100%) disconnect from the pc.
10) Press power button.

Regards