Rom for JLINKSZ k960

[marchefeu]

Hi marchefeu,
sadly the specs from the shop where I bought it were fake, but it would take ages to give it back. Its a 9,7" tablet and as far as I can see, the flash is 16 GB and ram is 1GB.
Chipset ist MT8310a. As I found out, this chip ist equal to mt6580. The same as in the specs of your tablet. The rest you see in the pics.
I guess because of the different screensize, I can not use your firmware?
I would need to find the correct firmware to Flash it.
I downladed your firmware, but again, the scatter file contains different filenames to the zip Container. In the scatter file I have got e.g. custom.img and in the zip Container e.g. JBKB072L0.img. Do you use a different Flash tool to SPFlash. How does the file linking work from the scatter file, when you Flash?
I guess I miss a step, but don't find this Information.
kr
fire

---

For those who have problems with the scatter file not linking the files, I found the solution:
If the scatter files Suffix Ends with .txt you use the SP Flash tool to link the files and with the .scr scatter files you Need wiselink or jlink Flashtool.
Here is the Information:
[Only registered and activated users can see links Click here to register]

br
Hi Fire,
just one question you say you have a MT8310 but on picture you post I see a MT8321A ...

For the moment , I don't find software that recognize these files...
Wiselinktool say "Handsets baseband chip is unknown type. Please check DA and BROM DLL are no thesame version (Error code= 1018)" when I select .sca (tested with different ROM)
And SP Flash Tool open .sca but the list of file it display below seem not consistent with my file...
Even so I have test to flash it with file proposed by SP FLash and it was bricked but always recognized by computer...