![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
2016-11-23, 00:21
Sorry for the delay:
50 % means the battery is new... not bad connection.
It came with the cable and original connector to the PCB.
Just screws of the lateral plastic off, and then disconnect the old battery, connect the new one, put again all the plastic and screws, and works.
There are only 2 tricky things: Battery is pasted with double sided tape, and I had to be careful, and the second is that the connector I had to disconnect from the side (I didn't know, just use the cup of a pen to push up)
The battery is working perfectly.
50 % means the battery is new... not bad connection.
It came with the cable and original connector to the PCB.
Just screws of the lateral plastic off, and then disconnect the old battery, connect the new one, put again all the plastic and screws, and works.
There are only 2 tricky things: Battery is pasted with double sided tape, and I had to be careful, and the second is that the connector I had to disconnect from the side (I didn't know, just use the cup of a pen to push up)
The battery is working perfectly.