![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
2016-08-31, 21:32
(This post was last modified: 2016-08-31, 21:37 by UbuntuUser84.)
(2016-08-31, 18:33)MegaManX Wrote: QFIL is started with Android booted, not bootloader. If you don't see the driver/port qualcomm 9008 HS-USB or something similar register in QFIL, here are a few things you can try
- try to change to charge only mode, and back to MTP
- unplug from USB and plug again
- Turn off developer mode and turn on again and enable debugging
If still not registering port in QFIL, go into adb on PC and enter "adb reboot edl". The phone should Then boot to emergency download mode. Then you should see it register port on QFIL...assuming you've installed drivers.
Yes, I meant edl, not bootloader.
Where do I find the "correct" drivers? I installed drivers that seemed correct, but the driver-link in "ROM PC flash tutorial (wire brush)" doesnt work.
When in Android it show the device as "Qualcomm HS-USB Diagnostics 9091 (COM8) and when switching to edl "No Port Available".
When I activate "Show Non Qualcomm Port" it shows as "RELINK HS-USB QDLoader 9008 (COM12)