SIm Card Not Detected ** Need NVRAM POMP W89 or Flying F600 HELP! I WILL PAY $$$

[flight]

Hi see if this helps you

1. Download and Install Mobile Uncle then grant superuser permission
2. Select Engineer mode
3. Select Engineer mode (MTK)
4. Navigate to the Connectivity tab
5. Select CDS information
3. Select Radio Information

4. At Phone 1: Insert the command below then click Send at command
AT+EGMR=1,7,"IMEI1"

At Phone 2: Insert the command below then click Send at command
AT+EGMR=1,10,"IMEI2"


6. Go back to Mobile uncle home screen

7. Click on Engineer Mode
8. Select Engineer mode (Android)
9, Select Phone information
10. Click Turn on radio

reboot phone