[iNew V8] New stock firmware

[Louis777]

@gizbeat
@inspectaclueso
@wuddawaste
@iNewUser for this Phone


All you do at your own Risk!
Motto reading - reading - working and befor make Backup!

BTW: I hear from blank Screen. Take following:
Flash your lk.bin/UBOOT.IMG from your old Backup. with the new ROM.
There are functioning LCD Driver inside!


Hello at all,

I will think about the right way for you. First I recommended - use only SPFlash Tool v.5.1420.00 !

Use only the extended Scatter 2_5GB with more Entries (see failure in #6 --> wrong Scatter) and the new EBR's 2_5GB from my Post!

Check under Options DA/DL then Upgrade - then Download - then connect your switched off Phone without Battery, immediately Battery in - flash start...

I take Pictures to flash for you and posted it here.

Queston: Wich Version you like to flash! Baidu or the other?
Here I use Baidu

Updated:
Enclosed you will found the Pictures before Flash_Progress!

                   

Here with arrows & normal size and CWM Port-Image.:

[Only registered and activated users can see links Click here to register]

When you Port the Carliv CWM before you Flash the new ROM, you can flash it with the ROM!

Don't flash the port-Image!!

Go to MTK Droid Tool v. 2.53 and make before a NVRAM Backup. Then on the second Tab - cross Boot.img from Phone then Recovery and Boot!

Enclosed my TUT:

[Only registered and activated users can see links Click here to register]

After creating you select the patched Boot.img and the new created CWM-Image in SPFlash Tool instead the Org-Files! The new created Files are in MTK Folder Backup!

Greetings and good luck

Louis777
.