[iNew V8] New stock firmware

[Louis777]

@Gizbeat

Hello,

excuse me for correction at your Post #1!

The way to flash with this EBR's - it is only right about 50%!

Why ??

You have to change & flash the EBR' 1&2 and a new changed scatter file too!

Example: You walk on a street. You see on your right side House # 20 then 18 then 16 .....

House #20 is fat - House #18 is usrdata and you "stretch" House #18 to #20 - and you can look in #18 & #20 at same time!

I hope you understand my Example.

You have to flash EBR1 & EBR2 and the changed scatter file!

Enclosed you will found some pictures of my post.

You can take a look before and after flash by Terminal Emulator with following command:
cat /proc/dumchar_info

The same for MTK Droid Tool to read the scatter before and after flashM

This way from me to flash work only with "firmware upgrade" and are like factory default!!!

Listen: dumchar is the "bible" for android!

If you send me the scatter - I can make the changes for you!

My pics is for 2.5GB Example.

Greetings

Louis777

                   
.
I downloaded the ROM and changed the EBR1 & 2 and Scatter File to right Size and Value!! Copy all Files in your SPFlash Folder where the ROM resides. Select first the 3.5GB scatter File then the new 2.5GB EBRs - click upgrade and dowload in SPFT for flash.Connect your Phone with USB and put akku in!

Here the right Files for Flash - Old and New! Please response!

  Flash_SPFT_iNew_v8_3.5GB.rar (Size: 2.76 KB / Downloads: 135)
.