[iNew V8] New stock firmware

[GizBeat]

Huge props again to iNew who have released 2 firmware updates since iNew V8 came out.

This iNew v8 update is dated 12-SEP-14

[Many fixes. Including fixes for phone, bluetooth, screen, touch response]. Unfortunately not more specific than this.

Needrom download iNew V8 ROM:
[Only registered and activated users can see links Click here to register]

Baidu iNew V8 firmware ROM:
[Only registered and activated users can see links Click here to register]

It's a very simple download. Don't let the Chinese confuse you.

Mobile:
   

PC:
   

ADB VCOM Drivers (PDANet recommended to try first)
[Only registered and activated users can see links Click here to register]

SPMDT Flash Tool
[Only registered and activated users can see links Click here to register]

Optional: EBR replacement files for 3.5GB internal (rename original EBR, then paste these into ROM folder)
[Only registered and activated users can see links Click here to register]

Instructions after/while downloading new ROM:

1. Install ADB Drivers. See the tools section here. PDANet is a good one to try first. You only need to install the drivers on PC. Do not need to complete the install of PDANet onto the phone if you don't want.

2. Download, and run SPMDT. This is the tool you will use to install the firmware.
   

3. Direct SPMDT to the location of the ROM and select the MT6592_Android_Scatter

4. Follow the image here and select the options accordingly
   

5. After saving options in step #4, you will a screen similar to this. Follow this image. Select the 1st COM port and click "Start All"
   

6. Remove battery from V8

7. Connect Phone to PC via USB

One of the small bars in SPMDT should turn red, then flash multiple colors as it flashes the ROM.

NOTE: You flash at your own risk. Making a brick is always possible.