(2014-06-05, 22:02)flat__line Wrote:(2014-06-05, 05:37)carcaca Wrote: I ported a zoppo 998 rom that is ported from iocean g7.
Only replace boot.image, firmware folder and audio libs.
Everything works good. Better wifi signal and GPS fixs in less than 30 seconds. The only thing that doesn't work is smartwake from this rom but is different from ours. Maybe problems with kernel.
Porting mtk6592 is different from others mtk devices.
so you could kind of 'script' rom porting: just unpack, replace, re-pack?
Don't need to unpack. Open booth in 7zip and replace boot.image and firmware folder from original to ported. Take a look at build.prop to see if you see anything different like rom space. For example cm11 in T100 add a line with 32g rom and cm11 from t11 this line as only 16g rom.
Don´t forget to try anyone with the same processor (mtk6592) and this maybe work or not. In this case i only replaced audio libs because no sound in calls.
I tried other 2 roms from zoppo and in booth no phsysical keys. Tried to replace files relationed with keys but don´t work.
Install and if rom boot you need to test everything.
Dont forget to make a backup first.