2014-02-23, 11:02
Many people have had a screwed up home button after flashing LeWa ROM.
After returning to 1.0.4. via SP Flash Tool, the problem remained.
This is what fixed it for me.
1. Download original full 1.0.1 CXQ for iNew V3.
2. Flash it with SP Flash Tools using 'Firmware Upgrade' mode
3. Boot into recovery (Vol+Power) and factory reset.
4. Reboot your phone
At this point the home button was fixed.
I then SP flashed back to v1.0.3 . The home button is still operating normally. My guess is you could also flash back to 1.0.4 if you prefer that firmware.
Please let us know your results.
After returning to 1.0.4. via SP Flash Tool, the problem remained.
This is what fixed it for me.
1. Download original full 1.0.1 CXQ for iNew V3.
2. Flash it with SP Flash Tools using 'Firmware Upgrade' mode
3. Boot into recovery (Vol+Power) and factory reset.
4. Reboot your phone
At this point the home button was fixed.
I then SP flashed back to v1.0.3 . The home button is still operating normally. My guess is you could also flash back to 1.0.4 if you prefer that firmware.
Please let us know your results.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth