[ROM] Vernee Apollo X - STOCK ROM and TWRP

[Etk9]

@Etk9 :

Reboot (in normal mode) your phone.
Now the phone do not spontaneously reboots 1 or 2 times.

@"Cleopatra"

Yes the phone does not reboot reboot spontaneously, but I can't use phone and data connection, the smartphone says "INVALID IMEI"

[Cleopatra]

@Etk9 :

Reboot (in normal mode) your phone.
Now the phone do not spontaneously reboots 1 or 2 times.

@"Cleopatra"

Yes the phone does not reboot reboot spontaneously, but I can't use phone and data connection, the smartphone says "INVALID IMEI"

STEPS :

1) Reboot onto TWRP recovery
2) Restore NVRAM
3) Reboot in normal mode.

Regards

[Etk9]

@Etk9 :

Reboot (in normal mode) your phone.
Now the phone do not spontaneously reboots 1 or 2 times.

@"Cleopatra"

Yes the phone does not reboot reboot spontaneously, but I can't use phone and data connection, the smartphone says "INVALID IMEI"

STEPS :

1) Reboot onto TWRP recovery
2) Restore NVRAM
3) Reboot in normal mode.

Regards

@"Cleopatra"

Just done. All works fine, now I can phone and use data again.
I found that the TWRP you patched for this device works fine only with the 20170328 version of the ROM.
Thank you very much for your patience and help. You're a great person!

[schulti]

---

hi @"cleopatra",

i got the vernee apollo x from my brother. the phone is running with the original rom but he already updatet it with the ota update from 26.04.2017.

does your guide works with that or is there a way i can back to the factory rom?

thanks and greetings

@schulti :

Hello.

Are you planning to install the TWRP ?

Regards

yes, i would like to install TWRP. And then flash ResurrectionRemix OS.

regards

[Cleopatra]

@schulti :

Hello.

Your brother did the right thing.
As I have written (here and on Needrom) :

BEFORE PROCEEDING :
Make sure you HAVE INSTALLED the ota update 2017-4-26 !



NOW :

1) Install the TWRP (follow carefully the steps here on Chinaphonearena).
2) Then, install the ResurrectionRemix v5.8.3 Final.

Regards

[kheradon59]

Hi Cleopatra,

I test the new TWRP.

Every time I boot to recovery I get the logo with the message "no command".

To resolve, I flash the stock rom with format and no format --> no success, same message.

Any idea ?

The 3.0.3 work fine from fastboot

[Cleopatra]

Hi Cleopatra,

I test the new TWRP.

Every time I boot to recovery I get the logo with the message "no command".

To resolve, I flash the stock rom with format and no format --> no success, same message.

Any idea ?

The 3.0.3 work fine from fastboot

Hello.

You tested my twrp in the wrong way.
It is because you did not follow my instructions.
Please follow carefully once again the steps at post number 48.

Do you have flashed the stock rom with the format option ?
I hope that you have made a backup of the nvram before to do it.

Regards

[strause]

Hello,

I've problem. If I flash twrp 3.0.3 using SP Flash, I can't boot to recovery. It reboots and starts to normal system. Can you help me, please?

[Cleopatra]

@strause :

Before to flash the twrp custom recovery :

Do you have enabled OEM unlocking and USB debugging ?

After flashing twrp custom recovery :

1) Press volume up + power buttons simultaneously.
2) Then, select the first white line and press volume down.

Regards

[strause]

@strause :

Before to flash the twrp custom recovery :

Do you have enabled OEM unlocking and USB debugging ?

After flashing twrp custom recovery :

1) Press volume up + power buttons simultaneously.
2) Then, select the first white line and press volume down.

Regards

I've made these steps. I've tried flash new repacked stock rom with format all + download option and flash new TWRP and it didn't boot again.

I've tied it with twrp 3.0.2 and wuth carliv. It starts to recovery but without touch (I know, this is bug, but it boots)