![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
2017-02-05, 23:57
(This post was last modified: 2017-02-06, 03:30 by sshhuurraavvii.)
Hello! The forum another forum user [another forum] was posted the backup [another forum modified stock firmware 113 for the 1st revision of the Homtom HT3 Pro[/b][/color][/size][/url]. It flashable by TWRP recovery.
Changes in comparison with the stock firmware:
+ Removed useless battery picture and made a%
+ Clock in the middle
+ Speed of incoming Internet in the curtain
+ Removed from the status bar huge letters duplicate G, E, 3G, 4G
+ Slightly changed the font on the lock screen clock (as in the Android M)
+ Changed the settings icons on the stock android
+ Added Russian letters in the dialer (by the dark, better to replace)
+ Changed LED priority (now on the charge when the light is red, then, if they come to the notice, will blink green (in a stock still shines red))
+ Changed the display of the full charge (green lights are now only ever be 100% rather than a stock at 90%)
+ Engineering menu item in the settings made (in accessibility)
+ Native audio player replaced by the player Sony (updated through the play of market)
+ Native browser replaced with a browser from CM
+ Native launcher replaced with Nova Launcher
+ Audiomod with equalizer (works on all but the native radio)
+ Wallpaper replaced
+ Deleted item updates "over the air" because it is useless for custom firmware
+ Removed hot knot (4 applications)
+ As a root set SuperSU-v2.78-SYSTEMMODE
+ Replaced boot logo
cleaned the trash. Anyone who installed it liked. Maybe someone here will like it too ...
The LedWakeLock problem after incoming calls and SMS can be solved by .
Like any stock firmware for Homtom HT3 Pro there is a problem with the battery run LedWakeLock discharge to turn on the LED.
It is necessary to reduce the power save mode, up to 5%, and try not to discharge up to this level. If still red LED blinks, after charge the battery more than 5%, you must restart the smartphone.
Try ... Good luck!
Changes in comparison with the stock firmware:
+ Removed useless battery picture and made a%
+ Clock in the middle
+ Speed of incoming Internet in the curtain
+ Removed from the status bar huge letters duplicate G, E, 3G, 4G
+ Slightly changed the font on the lock screen clock (as in the Android M)
+ Changed the settings icons on the stock android
+ Added Russian letters in the dialer (by the dark, better to replace)
+ Changed LED priority (now on the charge when the light is red, then, if they come to the notice, will blink green (in a stock still shines red))
+ Changed the display of the full charge (green lights are now only ever be 100% rather than a stock at 90%)
+ Engineering menu item in the settings made (in accessibility)
+ Native audio player replaced by the player Sony (updated through the play of market)
+ Native browser replaced with a browser from CM
+ Native launcher replaced with Nova Launcher
+ Audiomod with equalizer (works on all but the native radio)
+ Wallpaper replaced
+ Deleted item updates "over the air" because it is useless for custom firmware
+ Removed hot knot (4 applications)
+ As a root set SuperSU-v2.78-SYSTEMMODE
+ Replaced boot logo
cleaned the trash. Anyone who installed it liked. Maybe someone here will like it too ...
The LedWakeLock problem after incoming calls and SMS can be solved by .
Like any stock firmware for Homtom HT3 Pro there is a problem with the battery run LedWakeLock discharge to turn on the LED.
It is necessary to reduce the power save mode, up to 5%, and try not to discharge up to this level. If still red LED blinks, after charge the battery more than 5%, you must restart the smartphone.
Try ... Good luck!
