Login

**Naphtha** · (This post was last modified: 2015-07-29, 18:57 by Naphtha.)

Hi guys,
i have disassembled the phone for check the GND for force boot and flash the Rom from SP Tool.

Look the image 1:

when i try to connect GND and "A" the phone stay connected (not unplug plug unplug plug) and i believe i can flash the rom with sp tool.

......BUT..... (You could not believe what I'm about to tell you .....

)
With a wrong maneuver the flex cable USB port is broken.

(ahahahahahha look the image 2

)

And now i need to test it the next week, when my phone come back from customer service.

**Piri72** · (This post was last modified: 2015-08-16, 02:06 by Piri72.)

the trick of the bridge is good news, but that driver you used with sp tool?

From xxxx://forum.gsmhosting.com/vbb/f723/android-modifide-magic-cable-1643123/index4.html#post10166590

Can this be a valid alternative to the bridge?

**Naphtha** · 2015-08-19, 21:17

(2015-08-16, 01:03)Piri72 Wrote: the trick of the bridge is good news, but that driver you used with sp tool?

From xxxx://forum.gsmhosting.com/vbb/f723/android-modifide-magic-cable-1643123/index4.html#post10166590

Can this be a valid alternative to the bridge?

Just unplug the battery and plug in the USB + Volume Down... the phone go in preloader

**Piri72** · 2015-08-19, 22:37

have you personally tested this solution?

**Naphtha** · 2015-08-19, 22:47

(2015-08-19, 22:37)Piri72 Wrote: have you personally tested this solution?

Yep. Look it

**Piri72** · 2015-08-19, 22:55

(2015-08-19, 22:47)Naphtha Wrote:
(2015-08-19, 22:37)Piri72 Wrote: have you personally tested this solution?

Yep. Look it

Big! I suppose then there is the usual authentication error message

PS: There are several drivers for mediatek online, which are you using?

**Naphtha** · (This post was last modified: 2015-08-19, 23:02 by Naphtha.)

(2015-08-19, 22:55)Piri72 Wrote: [Only registered and activated users can see links Click here to register]

We need only .auth file...and we have the Ubuntu on Meizu MX4

[Only registered and activated users can see links Click here to register]

MTK Download Software SOP - MANUAL

**Piri72** · (This post was last modified: 2015-08-19, 23:37 by Piri72.)

can you test this?
1 turn off the phone, leaving the battery inserted
2 disconnect the USB cable
3 launches SP Flashtool
4 hold volume - and simultaneously connect the USB cable

I think that Meizu will still in PRELOADER mode

It would be useful to retrieve the phones without voiding the warranty

**Naphtha** · (This post was last modified: 2015-08-19, 23:09 by Naphtha.)

Nah...

1 Turn off the phone
2 Disassembly the white cover
3 Plug Out the Flat cable of battery
4 Hold Volume DOWN
5 Plug in the USB
6 (preloader popup)

**Piri72** · 2015-08-19, 23:39

Thanks for the links
Tonight I'll buy a new cable, and tomorrow I'll test

Login
Username:
Password:	Lost Password?
	Remember me