www.chinaphonearena.com
[TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - Printable Version

+- www.chinaphonearena.com (https://www.chinaphonearena.com/forum)
+-- Forum: Phone & Tablet Root, Hack and Develop (https://www.chinaphonearena.com/forum/Forum-Phone-Tablet-Root-Hack-and-Develop)
+--- Forum: Tutorials (https://www.chinaphonearena.com/forum/Forum-Tutorials)
+--- Thread: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet (/Thread-TUTORIAL-flashing-and-reviving-a-dead-or-alive-Allview-AX4-Nano-Phablet)

Pages: 1 2

[TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - cr4zychriss - 2014-10-12



RE: Help need a suitable rom for a rebranded china phablet - aus9 - 2014-10-12

great

can you do a full edit of your first post and pulldown the section that says ROM and change that to TUTORIAL

change your subject line to read the name of your device
phablet AX4 Nano

I will leave it to mods to decide where this should be posted or left in this General phone/hack forum.

cheers

RE: Help need a suitable rom for a rebranded china phablet - cr4zychriss - 2014-10-16

(2014-10-12, 08:59)aus9 Wrote: great

can you do a full edit of your first post and pulldown the section that says ROM and change that to TUTORIAL

change your subject line to read the name of your device
phablet AX4 Nano

I will leave it to mods to decide where this should be posted or left in this General phone/hack forum.

cheers

How do i do that? i cant even edit my own post Smiling ...
Can a mod please edit this thread ? Rename the Title and pin pos #9 ?

Thanks !

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - WuddaWaste - 2014-10-16

I have split this thread from the previous one, which can be found here:
[Only registered and activated users can see links Click here to register]

It is now sticky'd as a permanent tutorial. Thanks so much, @cr4zychriss for your time, help, and expertise.

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - zoranpg - 2014-11-02

I have done this for dead tablet (not starting at all):
1.download the FULL unbrick package
2.load the scatter and and click Download
3.unsolder the red battery whire from the PCB
4.conect red battery whire, and SPFlash start
but when SPFlash finished, phone started, come to "DUAL CORE" logo and restart ... and againe ... and againe ...
What to do??

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - cr4zychriss - 2014-11-03

(2014-11-02, 14:22)zoranpg Wrote: I have done this for dead tablet (not starting at all):
1.download the FULL unbrick package
2.load the scatter and and click Download
3.unsolder the red battery whire from the PCB
4.conect red battery whire, and SPFlash start
but when SPFlash finished, phone started, come to "DUAL CORE" logo and restart ... and againe ... and againe ...
What to do??

boot to recovery first after full flash and do master resest .

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - RoehdyG - 2014-11-11

Hi,
Just new here, and im seeking a guide on how can i revive my starmobile up totaly brick (dead), mtk 6582m kitkat 4.2,i wnna know if ican apply this tutorial to my phone. hppefully
thanks

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - deanlee121 - 2014-11-11

(2014-11-11, 16:56)RoehdyG Wrote: Hi,
Just new here, and im seeking a guide on how can i revive my starmobile up totaly brick (dead), mtk 6582m kitkat 4.2,i wnna know if ican apply this tutorial to my phone. hppefully
thanks

Welcome and I an sure you can get the help here to fix your phone

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - cr4zychriss - 2014-11-11

(2014-11-11, 16:56)RoehdyG Wrote: Hi,
Just new here, and im seeking a guide on how can i revive my starmobile up totaly brick (dead), mtk 6582m kitkat 4.2,i wnna know if ican apply this tutorial to my phone. hppefully
thanks

You can aply just the tutorial not the files except your phone (phablet/tablet) in this case is Allview AX 4 Nano! The flashing procedure is the same on all MTK Phones/Tablets but you must flash files suited for your device, unless u want to end up with a ping-pong palet Smiling ! I suggest you open a new thread (only if you dont allready find the model / topic of your device) using your phone's data .

Something like ...

TITE: [HELP] Revive "Phone Name"

CONTENT:
1. Phone brand (original / fake / clone / copy wtvr)
2. Phone name (model )
3. Phone chipset MTK 65xx
4. What happened
5. What you need / want to do.

And shortly someone will reply with some info !

Good luck !

RE: [TUTORIAL] flashing and reviving a dead or alive Allview AX4 Nano Phablet - razvan - 2014-12-14

I'm trying to install CWM on this tablet with MTK Droid and it's not working
--->>> Connect to device <<<---
ATTENTION! Fake Hardware in kernel or firmware doesn't correspond to phone!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
- Boot kernel version =3.4.67
- Boot allready patched , skip creation new file
--- test recovery OK !
It is created: C:\Users\razvan\Downloads\Full_Pack_AX4NANO\MtkDroidTools_2.5.3\MtkDroidTools_2.5.3\recovery\AX4Nano_140825__recovery_141214-020952.img
--- ERROR :Recovery doesn't match by the size
--- task is complete ---

any ideas?