+- www.chinaphonearena.com (https://www.chinaphonearena.com/forum)
+-- Forum: Brand Specific (https://www.chinaphonearena.com/forum/Forum-Brand-Specific)
+--- Forum: iNew® (https://www.chinaphonearena.com/forum/Forum-iNew%C2%AE)
+---- Forum: iNew V3 (https://www.chinaphonearena.com/forum/Forum-iNew-V3)
+----- Forum: iNew v3 ROM / Firmware (https://www.chinaphonearena.com/forum/Forum-iNew-v3-ROM-Firmware)
+----- Thread: [How-To] iNEW V3 ROM 1.1.1 - SIM Cards OFF (/Thread-How-To-iNEW-V3-ROM-1-1-1-SIM-Cards-OFF)
Pages:
1
2
iNEW V3 ROM 1.1.1 - SIM Cards OFF - marcosaless - 2014-09-07
Hi guys,
Just bought a v3 INEW with ROM 1.1.1 and I was trying to update to 1.1.5 and got in the way manufactures and cranked up an item that defined settings manufactures, from that the unit is working ok but the SIM cards are not recognized, could anyone help me recover the functioning of SIM cards?
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - WuddaWaste - 2014-09-07
It sounds like you may have wiped your IMEI numbers. Go to our tutorials section and there should be a sticky on how to repair / restore the IMEI.
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - marcosaless - 2014-09-07
Hi WuddaWaste, but I must say that the engineer mode, and in phone1 phone2 appear that the radio is turned OFF when will sending the command EG+ and a message saying the AT command is failed to send.
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - cookiedough - 2014-09-07
If you have tried to restore via engineering mode and have tried to restore with mtk droid tool and both methods fail, then you will likely need to restore nvram.
Hopefully you made a backup. If not, I believe there is a backup somewhere in v3 forum.
See tutorial section for how to restore.
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - marcosaless - 2014-09-09
Nothing could. Check it: I tried to restore NVRAM via MTK Tools Droid with a backup found here on site and simply does not copy anything to the device. I tried to install a ROM 1.1.1 found here on the website, via SP Tools, following a tutorial done by Gizbeat and simply nothing happens, it does not copy anything to the device. PdaNet + USB tether makes the connection and the application screen is dimmed and no download occurs. It sounds I'll have to put a new ROM on my device to solve the problem of IMEI, but I am just not finding a solution that works correctly. What do you think I can do now, what choice someone can tell me?
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - Athos - 2014-09-09
Do you have a valid serial number?
Try restoring your database modem file and apdb file. Check the v1.1.5 ROM you installed. It should have those files.
Use this program
Install and run the program as administrator. Under Options, select to connect into meta mode.
Click on Reconnect. While your phone is off, connect it to PC.
From the drop down menu on the main window, select Update parameter.
In the new window that pops up, tick Barcode at the bottom.
Click on Change NVRAM DB then select the database modem file (it should be named BPLGUInfo...something)
Click on the Load from file then select the ini file (should be specified to match your chipset, MT6582)
Click Download to flash, then check if your Serial Number is restored.
I hope it works.
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - marcosaless - 2014-09-10
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - Auntiiiz - 2014-09-10
try this I fix my phone the same problem complete
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - marcosaless - 2014-09-11
RE: iNEW V3 ROM 1.1.1 - SIM Cards OFF - Athos - 2014-09-12
marcosaless, any luck yet?
Have you seen this thread?
It looks like some experienced issues with v1.0.4 as well. See post #68 about getting the PC to recognize your phone.
If you are able to use SP Flash Tool again, try the v1.1.5 you used as it seems to have worked for you (IMEI issues aside).
Good luck!