[How-To] Unbrick S3 Mini (MTK6575) + Invalid IMEI(null) - Printable Version +- www.chinaphonearena.com (https://www.chinaphonearena.com/forum) +-- Forum: General (https://www.chinaphonearena.com/forum/Forum-General) +--- Forum: General Android & Phone (https://www.chinaphonearena.com/forum/Forum-General-Android-Phone) +--- Thread: [How-To] Unbrick S3 Mini (MTK6575) + Invalid IMEI(null) (/Thread-How-To-Unbrick-S3-Mini-MTK6575-Invalid-IMEI-null)

Unbrick S3 Mini (MTK6575) + Invalid IMEI(null) - elsapao - 2014-05-12 Req. *SP FLASH TOOLS. (use google search ^_^V) *IMEI/SN Writer (use google search) *[Only registered and activated users can see links Click here to register] *USB VCom Driver.rar (see attachment below) *MTK6575 adb (see attachment below) *USB cable Lets Start. Download all given requirements. Make sure u have installed MTK USB Vcom Driver. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ how to install MTK USB V com Driver: Extract USB VCom driver.rar ,and go to Device manager > Action > Add Legacy Hardware.select NEXT>Install the hardware that i manualy select from list(advance), then click> NEXT>Show all drivers,then NEXT, Click on HAVE DISK. and browse the Extracted USB Vcom driver.inf, and install all driver MTK USB PORT, MediaTek Preloader USB Com VCom Port, etc. etc. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ *Now Extract Flash Rom. *Run SP FLASH Tools. *Click SCCATER FILE, and load: MTK65** _android_scatter.txt. *Now Turn Off ur Phone. Remove the battery and put it again after a few seconds. *Connect ur Phone Into Computer via USB Cable *Click DOWNLOAD, and you will see red progress bar, wait till the proccess is done, and u'll get a popup with a GREEN CIRCLE..(and voila ur phone now is Unbrick) +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Invalid IMEI(NULL) can't fix using Mobile Uncle/Maui Meta. *Extract MTK6575.rar. *Open RootExplorer.(ur phone must be rooted) go to Data/Nvram/Md, and delete NVRAM folder. *turn off ur phone *now run IMEI/SN Writer, tick IMEI(write ur 15 digits IMEI number,) change FEATURED PHONE to SMART PHONE > Tick USB , *click "SELECT DB" and select ""bplguinfocustomappsrcp_mt6575_s01_maui_11amd_w11_50_sp_v30_p2"" and ""apdb_mt6575_s01_alps.gb2.mp_"" from ur Extracted MTK 6575.rar *Click START, *Connect phone to comp via usb cable. *and wait till the process is done. *Now Turn on ur phone,, and check ur imei if it works. by typing " *#06# " =========================DONE =========================== (hope u understand my tutorial, plss pardon me for wrong grammar coz im not good in enlish..) RE: Unbrick S3 Mini (MTK6575) + Invalid IMEI(null) - neopogs - 2014-07-04 tnx a lot... a got back may imei again... RE: Unbrick S3 Mini (MTK6575) + Invalid IMEI(null) - beatvelandia - 2014-12-19 muy bueno me funciono perfectamente gracias