need for help - Printable Version +- www.chinaphonearena.com (https://www.chinaphonearena.com/forum) +-- Forum: Brand Specific (https://www.chinaphonearena.com/forum/Forum-Brand-Specific) +--- Forum: iNew® (https://www.chinaphonearena.com/forum/Forum-iNew%C2%AE) +---- Forum: iNew V3 (https://www.chinaphonearena.com/forum/Forum-iNew-V3) +----- Forum: iNew v3 ROM / Firmware (https://www.chinaphonearena.com/forum/Forum-iNew-v3-ROM-Firmware) +----- Thread: need for help (/Thread-need-for-help) |
need for help - ahmedsh22006 - 2014-05-06 I've got inew v3 and this is the first time to buy chinese phone . I saw a new farmeware from devteam ....tried to install it from the sd through the recovery .....now the phone not working just the logo of devteam appear ..... How can i resolve this problem RE: need for help - nikstar - 2014-05-06 Send them an email about this problem. Maybe it needs a special procedure in order to install their rom. Otherwise try reinstall it, or reinstall everything from spf tools. You are not giving to us enough information to help you. (like what recovery you have, which was your previous version, did you get a BACK UP BEFORE???) RE: need for help - ahmedsh22006 - 2014-05-06 Ok. The recovery is carliv touch recovery v2.1 MTK CWM- based v6.0.4.4 The last v. Was v3 e 1.0.4 RE: need for help - nikstar - 2014-05-07 Did you get a backup? RE: need for help - ahmedsh22006 - 2014-05-07 No...it is my mistake RE: need for help - nunytes - 2014-05-07 Yap, probably the best is flash trough sp flash tool again or the stock ROM... RE: need for help - GizBeat - 2014-05-07 RE: need for help - stevenma61 - 2014-05-07 try to flash the boot.img only from other version, or the stock rom boot.img sometimes , it will boot again and u will have the rom from devTeamVn rom installed. I have been flashing/porting rom over n over to my phone, sometimes, by just flashing the boot.img, then the phone will boot again. If u don't want to flash it tru SP flash tool, u can just change the boot.img in the rom u had downloaded from DevTeamVn, then flash it tru the recovery again. I had ported the rom from DevTeamVn to Jiake JK11 n Jk12 and UMI X1 pro, they all work out fine. RE: need for help - ahmedsh22006 - 2014-05-11 (2014-05-07, 07:23)stevenma61 Wrote: try to flash the boot.img only from other version, or the stock rom boot.imgCan you upload the suitable boot.img RE: need for help - stevenma61 - 2014-05-11 I dont have V3. Just download the Rom from the web. And extract the boot.img |