+- www.chinaphonearena.com (https://www.chinaphonearena.com/forum)
+-- Forum: General (https://www.chinaphonearena.com/forum/Forum-General)
+--- Forum: General Android & Phone (https://www.chinaphonearena.com/forum/Forum-General-Android-Phone)
+--- Thread: Smart Tool Flash Tool - mediatek (/Thread-Smart-Tool-Flash-Tool-mediatek)
Smart Tool Flash Tool - mediatek - 007fred50 - 2019-09-24
Hello,
i'm tryint to install OS in my mediatek Phone.
but i flashed the Phone, but nothing OS inside the phone.
i trying to connect the phone to computer (Smart Phone Flash Tool)
I got this logs here;
Code:
add@/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3
add@/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0
add@/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/tty/ttyACM1
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM1
Total wait time = -1569335421.000000
USB port is obtained. path name(/dev/ttyACM1), port name(/dev/ttyACM1)
USB port detected: /dev/ttyACM1
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
COM port is open. Trying to sync with the target...
Failed to Connect DA: S_FT_DA_NO_RESPONSE(4001)
Disconnect!
BROM Exception! ( ERROR : S_BROM_CMD_JUMP_DA_FAIL (2035)Can some one hwo to fix this?