[Question] Inew V3-E Touchscreen not working at all - Printable Version +- www.chinaphonearena.com (https://www.chinaphonearena.com/forum) +-- Forum: Brand Specific (https://www.chinaphonearena.com/forum/Forum-Brand-Specific) +--- Forum: iNew® (https://www.chinaphonearena.com/forum/Forum-iNew%C2%AE) +---- Forum: iNew V3 (https://www.chinaphonearena.com/forum/Forum-iNew-V3) +---- Thread: [Question] Inew V3-E Touchscreen not working at all (/Thread-Question-Inew-V3-E-Touchscreen-not-working-at-all) Pages:
1
2
|
Inew V3-E Touchscreen not working at all - Paulus02 - 2014-01-27 RE: Inew V3-E Touchscreen not working at all - Sniper47 - 2014-01-27 This happen to a few other. You need ship it back to seller for the repair/ replace. RE: Inew V3-E Touchscreen not working at all - Burs - 2014-01-27 Sorry to hear that. "Since two days" means it's like that from the first day, or for the last two days only? EDIT: are your OTG working? Maybe you could at least back up your important data if you connect your mouse to it... RE: Inew V3-E Touchscreen not working at all - pletko - 2014-01-28 burs, congrats on your new rank, nice to see somebody from croatia marked as an expert, especially for the phone which is on its way to me RE: Inew V3-E Touchscreen not working at all - Burs - 2014-01-28 Thanks. At least I get some respect here for my efforts. That thread at X.D.A has gone haywire. RE: Inew V3-E Touchscreen not working at all - Paulus02 - 2014-01-30 (2014-01-27, 21:38)Burs Wrote: Sorry to hear that. "Since two days" means it's like that from the first day, or for the last two days only? Burs, I had the phone in use for around 2 weeks before this touchscreen issue. Two days before starting this topic is discovered the problem when i tried to unlock the phone. Thanks for the suggestion to backup the data. I contacted the seller (1949), but with the chinese newyear holiday it will take some days.. RE: Inew V3-E Touchscreen not working at all - GizBeat - 2014-01-31 (2014-01-30, 16:02)Paulus02 Wrote:(2014-01-27, 21:38)Burs Wrote: Sorry to hear that. "Since two days" means it's like that from the first day, or for the last two days only? Paulus, if you have ANY issues with getting warranty support after Feb. 6, Please contact me immediately with your order number and order details (name etc...). RE: Inew V3-E Touchscreen not working at all - Paulus02 - 2014-01-31 (2014-01-31, 03:16)Gizbeat Wrote: Paulus, if you have ANY issues with getting warranty support after Feb. 6, Please contact me immediately with your order number and order details (name etc...). If i have any problems with the warranty support i will contact you. Thanks! RE: Inew V3-E Touchscreen not working at all - Atheist - 2014-02-05 Hi dead for me too one hour after unboxing i think this is SW issu of touch controler firmwares and fix with touch chip reflashing now im searching to finde touch controler name and FW files regard RE: Inew V3-E Touchscreen not working at all - stevenma61 - 2014-02-05 i had a nexus 4 dipslay screen assy. replaced before by myself.(around 27/12/2013) after i installed it to the phone, my touch screen acted the same way as yours. it was not responding at all. At first i thought, it was a faulty part shipped, then checked with vendor, they said they had tested the part before they shipped out. So i did try to disassemble n reassemable again a few times. Then finally it was working. I think , most likely the problem is from the contact (flex cable from the digitizer and the plug/socket from the chipboard. If u think u can do it with yrself, then tried to disassemble the phone, and disconnect the flex cable, and make sure u clean the contact and the flex cable n reconnect it back. Edit : before trying the above method, try to flash few new roms, if after flashing 2 or 3 or 4 rom. u still get the same problems, then most likely it it from the hardware issue. either u send back for warranty or u can try above method. During the installation of the screen, sometimes the touch screen worked, once i put everything back in place , then the touch screen did not work, i had to install few times, then finally it worked as usual. |