[ROM] Cubot Manito - TWRP and ROMS - Printable Version +- www.chinaphonearena.com (https://www.chinaphonearena.com/forum) +-- Forum: Phone & Tablet Root, Hack and Develop (https://www.chinaphonearena.com/forum/Forum-Phone-Tablet-Root-Hack-and-Develop) +--- Forum: Tutorials (https://www.chinaphonearena.com/forum/Forum-Tutorials) +--- Thread: [ROM] Cubot Manito - TWRP and ROMS (/Thread-ROM-Cubot-Manito-TWRP-and-ROMS)

Cubot Manito - TWRP and ROMS - Cleopatra - 2016-12-20 CUBOT MANITO MT6737 - TWRP and PORTED ROMS TWRP 3.0.2.1 CUSTOM RECOVERY INSTALLATION STEPS : a) Tap on "Settings" -->"About phone" --> "Build number". b) Tap 7 times on "Build number". c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging". d) Download the next version of SP Flash Tool : [Only registered and activated users can see links Click here to register] e) Download the TWRP 3.0.2.1 at the next link : [Only registered and activated users can see links Click here to register] f) Turn off the phone. g) Open SP Flash Tool, load the scatter file and click on Download. h) Connect your phone to your pc with USB to start the flash process. i) When it finished, press "volume up" and "power" buttons simultaneously. j) Select the first white line with volume up. k) Press volume down to confirm. l) Enjoy. ////////////////////////////////////////////////////////////////////////////////////////////// CUBOT MANITO MT6737 - ELEPHONE C1 ported rom Download link : [Only registered and activated users can see links Click here to register] ***************************************************************** CUBOT MANITO MT6737 - BLACKVIEW E7 ported rom Download link : [Only registered and activated users can see links Click here to register] PORTED ROMS INSTALLATION STEPS : 1) Copy & paste the ROM ZIP into microSD. 2) Reboot into twrp custom recovery. 3) Make a full backup of stock rom (Boot, System and Data) into microSD. 4) Make a backup of NVRAM separately into microSD. 5) Tap on "WIPE" (main screen of twrp). 6) Tap on "Advanced Wipe". 7) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard. 8) Swipe to Wipe. 9) Return to the main screen of twrp. 10) Tap on "INSTALL". 11) Tap on "Select Storage" and tap on "Micro SDCard". 12) Tap on the ROM ZIP. 13) Swipe to confirm Flash. 14) When installation is finished, swipe to reboot. RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2016-12-21 CUBOT MANITO MT6737 - DOOGEE Y6C ported rom Download link : [Only registered and activated users can see links Click here to register] ******************************************************************** CUBOT MANITO MT6737 - OUKITEL U7 PLUS ported rom Download link : [Only registered and activated users can see links Click here to register] PORTED ROMS INSTALLATION STEPS : Please look at the first post RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2016-12-26 CUBOT MANITO MT6737 - BLACKVIEW A8 MAX ported rom Download link : [Only registered and activated users can see links Click here to register] PORTED ROMS INSTALLATION STEPS : Please look at the first post RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2017-01-12 CUBOT MANITO MT6737 - MODDED stock rom stock firmware version : CUBOT_6093C_MANITO_V09_20161114 WHAT ELSE IS NEW ? 1) Magisk-v10.2.zip (The Universal Systemless Interface). 2) xposed-v87.0-sdk23-topjohnwu.zip (Xposed Framework systemless). 3) XposedInstaller_by_dvdandroid_26_11_16.apk (new Xposed installer). 4) phh-superuser-topjohnwu-r2.zip (OpenSource SuperUser). 5) phh's SuperUser v1.0.3.3.apk (for integration to the phh-superuser.zip). INSTALLATION STEPS : 1) Download the "Cubot_Manito_V09-MOD.zip" at the next link : [Only registered and activated users can see links Click here to register] 2) Copy & paste "Cubot_Manito_V09-MOD.zip" into microSD. 3) Reboot into twrp custom recovery. 4) Make a full backup of stock rom (Boot, System and Data) into microSD. 5) Make a backup of NVRAM separately into microSD. 6) Tap on "Wipe" (main screen of twrp). 7) Tap on "Advanced Wipe". 8) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard. 9) Swipe to Wipe. 10) Return to the main screen of twrp. 11) Tap on "Install". 12) Tap on "Select Storage" and tap on "Micro SDCard". 13) Tap on "Cubot_Manito_V09-MOD.zip". 14) Swipe to confirm Flash. 15) When installation is finished, swipe to reboot. 16) BE PATIENT 8 minutes (Cubot boot logo). 17) Tap on the black icon of "Superuser" and tap on the 3 dots : 18) Tap on the icon of "Magisk Manager". 19) Enable Superuser Request : 20) This is the main screen of Magisk. 21) Do not worry about SafetyNet Failed. Now I am going to try to explain you this error : a) download "SafetyNet Helper" from the store. b) Run SafetyNet test. c) Response validation: fail. d) Tap on the 3 dots. Github will explain you the cause of the error. 22) Return to Magisk main screen and tap on "Settings". 23) Enable BusyBox and reboot the phone. 24) Tap on the icon of "Xposed Installer". Everything works well. RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2017-01-13 CUBOT MANITO - NEW TWRP 3.0.3 Based on the next stock firmware : ro.build.display.id=CUBOT_6093C_MANITO_V09_20161114 TWRP INSTALLATION STEPS : a) Tap on "Settings" -->"About phone" --> "Build number". b) Tap 7 times on "Build number". c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging". d) Download the latest version (5.1648.00) of SP Flash Tool : [Only registered and activated users can see links Click here to register] e) Download the NEW TWRP 3.0.3 at the next link : [Only registered and activated users can see links Click here to register] f) Turn off the phone. g) Open SP Flash Tool, load the scatter file and click on Download. h) Connect your phone to your pc with USB to start the flash process. i) When it finished, press "volume up" and "power" buttons simultaneously. j) Select the first white line with volume up. k) Press volume down to confirm. l) Enjoy. RE: Cubot Manito - TWRP and ROMS - rforeign - 2017-03-14 Hello, I am using your ROM CUBOT_6093C_MANITO_V09_20161114 and I have sd card 256GB, it's not recognize in Cubot Manito. Does it possible enable ntfs or exfat support for using high sd in Cubot Manito? How can do that? Thanks RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2017-05-02 CUBOT MANITO - rom version V20_2017-04-26 Firmware details : ro.build.display.id=CUBOT_6093C_MANITO_V20_20170426 ro.build.version.incremental=1493178984 ro.build.date=Wed Apr 26 12:05:23 CST 2017 - Added SuperSU-v2.79-SR3 - Added Busybox.v1.26.2 - Added init.d - Added Quick Reboot Root_v1.6.5 - Added AdAway-release_Build-Feb.08.2017 INSTALLATION STEPS : 1) Download the "Cubot_Manito_V20.zip" at the next link : [Only registered and activated users can see links Click here to register] 2) Copy & paste "Cubot_Manito_V20.zip" into microSD. 3) Reboot into twrp custom recovery. 4) Make a full backup of stock rom (Boot, System and Data) into microSD. 5) Make a backup of NVRAM separately into microSD. 6) Tap on "Wipe" (main screen of twrp). 7) Tap on "Advanced Wipe". 8) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard. 9) Swipe to Wipe. 10) Return to the main screen of twrp. 11) Tap on "Install". 12) Tap on "Select Storage" and tap on "Micro SDCard". 13) Tap on "Cubot_Manito_V20.zip". 14) Swipe to confirm Flash. 15) When installation is finished, swipe to reboot. RE: Cubot Manito - TWRP and ROMS - Cleopatra - 2017-07-18 Cubot Manito - NEW TWRP 3.1.0 This TWRP is intended for the next Marshmallow version : ro.build.id=MRA58K ro.build.display.id=CUBOT_6093C_MANITO_V20_20170426 ro.build.version.incremental=1493178984 ro.build.version.sdk=23 ro.build.version.release=6.0 ro.build.version.security_patch=2017-02-05 ro.build.date=Wed Apr 26 12:05:23 CST 2017 ro.build.date.utc=1493179523 Download Link : [Only registered and activated users can see links Click here to register] INSTALLATION STEPS : 1) Tap on Settings --> About phone --> Tap Build number seven times. Developer options --> OEM unlocking enabled and USB debugging enabled. 2) Download SuperSU v2.82 zip and BusyBox 1.26.2 zip at the next link : [Only registered and activated users can see links Click here to register] 3) Download the latest version (5.1724.00.000) of SP Flash Tool at the next link : [Only registered and activated users can see links Click here to register] 4) Unrar the SU_BU-June_2017.rar. Copy the 2 zips onto your microSD. 5) Unrar and run SP Flash Tool. 6) Unrar Manito-TWRP_3.1.0.rar 7) Load the scatter file inside the folder. 8) Select Download Only option. 9) Click Download. 10) Connect your turned off phone to the pc with USB cable. 11) Disconnect the USB cable. 12) Enter onto twrp recovery (volume up + power buttons simultaneously). 13) Select the first white line and press volume down. VITAL STEPS : 14) STEPS to change the Cyrillic alphabet onto your language : a) Swipe (from left to right), take a look at the next pic : b) Tap on the yellow rectangle, take a look at the next pic : c) Tap on the icon of the red arrow, take a look at the next pic : d) Et voilà, take a look at the next pic : 15) Tap Install, Select Storage, Micro SDCard, OK. 16) Tap on SR1-SuperSU-v2.82-SR1-20170608224931.zip 17) Swipe to confirm Flash. 18) Tap on Reboot. 19) Tap on the icon of SuperSU to activate it. 20) Repeat same steps for Busybox v1.26.2 zip I strongly recommend you to install the next apk : [Only registered and activated users can see links Click here to register] It is useful to avoid to press volume up + power buttons to enter onto twrp.