+- www.chinaphonearena.com (https://www.chinaphonearena.com/forum)
+-- Forum: Phone & Tablet Root, Hack and Develop (https://www.chinaphonearena.com/forum/Forum-Phone-Tablet-Root-Hack-and-Develop)
+--- Forum: *Tech support* General Phone & Tablet Root, Hack and Develop Root IMEI NVRAM CWM TWRP BRICKED (https://www.chinaphonearena.com/forum/Forum-Tech-support-General-Phone-Tablet-Root-Hack-and-Develop-Root-IMEI-NVRAM-CWM-TWRP-BRICKED)
+--- Thread: Unbricking MT6735M (/Thread-Unbricking-MT6735M)
Unbricking MT6735M - emv412 - 2016-03-19
Hello,
I have Azumi A50LT mobile phone. The phone wouldn't boot correctly so I decided to flash a new stock ROM. It is branded by Serbian network "Vip mobile" but i only found new ROM from network operator "Claro" from Columbia. In SPFlashtool i have first went to Format tab, and selected to format nand without bootloader. After that, i have flashed only system.img from the new ROM, but the phone wouldn't boot, so i flashed everything except preloader, lk and system again. After that the phone is not recognized by computer anymore. I managed to enter META mode by holding the buttons while connecting the usb, but i get "Mediatek USB Port" for only a few seconds, and it is disconnecting and reconnecting. I have tried to reflash preloader but i get error "enable dram failed". Is there anything i can do to fix this?
Thanks in advance.
RE: Unbricking MT6735M - Galacticos - 2016-03-20
If d phone is still recognise by flash tool in dead mode.. D only option u have got now is to flash another rom to the phone.. Try looking for another working same model of d phone so that u can read files from d working one to fix d dead one..
RE: Unbricking MT6735M - mix007 - 2018-02-12
(2016-03-19, 16:19)emv412 Wrote: Hola emv412,
Tengo el teléfono móvil Azumi A50LT. El teléfono no arranca correctamente, así que decidí flashear un nuevo ROM de stock. Está marcada por la red serbia "Vip mobile", pero solo encontré una nueva ROM del operador de red "Claro" de Columbia. En SPFlashtool, primero fui a la pestaña Formato y seleccioné el formato nand sin el gestor de arranque. Después de eso, he flasheado system.img solo desde la nueva ROM, pero el teléfono no arrancaba, así que flasheé todo excepto preloader, lk y system nuevamente. Después de eso, el teléfono ya no es reconocido por la computadora. Me las arreglé para ingresar al modo META manteniendo presionados los botones mientras conecto el usb, pero recibo "Mediatek USB Port" por solo unos segundos y se desconecta y se vuelve a conectar. He intentado actualizar el preloader pero me aparece el error "enable dram failed". ¿Hay algo que pueda hacer para arreglar esto?
Gracias por adelantado.
Muy buen amigo si lograste resolver tu problema, yo también estoy en el mismo problema. Tengo un IUM A5 Q5 azumi y como quería hacer un ROm y cuando me di cuenta de que di sin querer la opción del gestor de arranque y ya no quiero vivir de nuevo, como el mismo Tuyo Enable dram fall
si puedes hacer algo o resolver algo, publícalo como lo hiciste o al menos una referencia de agradecimiento salvaría mi vida
RE: Unbricking MT6735M - mix007 - 2018-02-12
(2016-03-19, 16:19)emv412 Wrote: Hello,
I have Azumi A50LT mobile phone. The phone wouldn't boot correctly so I decided to flash a new stock ROM. It is branded by Serbian network "Vip mobile" but i only found new ROM from network operator "Claro" from Columbia. In SPFlashtool i have first went to Format tab, and selected to format nand without bootloader. After that, i have flashed only system.img from the new ROM, but the phone wouldn't boot, so i flashed everything except preloader, lk and system again. After that the phone is not recognized by computer anymore. I managed to enter META mode by holding the buttons while connecting the usb, but i get "Mediatek USB Port" for only a few seconds, and it is disconnecting and reconnecting. I have tried to reflash preloader but i get error "enable dram failed". Is there anything i can do to fix this?
Thanks in advance.
Very good friend if you managed to solve your problem I am also in the same problem I have a IUM A5 Q5 azumi and since I wanted to make a ROm and when I realized I gave without wanting to the bootloader option and no longer want to live again like the same tuyo enable dram failed
if you could do something or solve something please publish as you did or at least one reference thank you would save my life
RE: Unbricking MT6735M - emv412 - 2018-02-21
(2018-02-12, 12:09)mix007 Wrote: Very good friend if you managed to solve your problem I am also in the same problem I have a IUM A5 Q5 azumi and since I wanted to make a ROm and when I realized I gave without wanting to the bootloader option and no longer want to live again like the same tuyo enable dram failed
if you could do something or solve something please publish as you did or at least one reference thank you would save my life
I took the phone to service center back then, so I didn't manage to solve the problem.
You might try flashing stock ROM using NCKDongle AndroidMTK, if you have MTK chipset