(2017-06-18, 16:36)B4STI2 Wrote: Hi when i boot into the recovery it's work but my touche screen seem's to be off so i can't use it...

(2017-02-04, 05:56)Cleopatra Wrote: @Guihardrock :

I have just finished to build my first TWRP test.
You will receive an email in round 5 minutes.
Please follow very carefully all the steps in my email.
If my experiment will works well, please make a screenshot of main menù.
The main menù of twrp is where there is the writing "repack Cleopatra81".

(2017-05-17, 07:59)Superdaex Wrote: [Only registered and activated users can see links Click here to register]

2) Install the adb drivers and fastboot commands :

[Only registered and activated users can see links Click here to register]

Unrar the rar.
Run “adb-setup.exe”.
Hit “Y” to all 3 questions.
The Google adb driver installer will then popup.
Go ahead and allow and install.

3) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> USB Debugging.
A warning will pop up. Go ahead and allow.

STEPS TO DO ONCE ONLY :

4) Plug your phone to PC via USB cable.
Allow the pop up request on your phone to give your PC USB debugging.
5) Open CMD (command prompt).
6) Type the next command :

adb reboot bootloader (and press enter)

7) Now type the next command :

fastboot oem unlock (and press enter)

8) Press volume up (into your phone) to confirm to unlock the bootloader.
You will see in the CMD prompt the next messages :

"Start unlock flow", and when it will be finished, you will see "OKAY".

9) Reboot in normal mode.

STEPS TO DO EVERY TIME YOU NEED TWRP RECOVERY :

10) Copy the recovery.img (inside my rar).
11) Paste the recovery.img inside C:\adb (the folder called "adb").
12) Disable OEM unlocking (Developer options).
13) Plug your phone to PC via USB cable.
14) Open CMD (command prompt).
15) Type the next command :

adb reboot bootloader (and press enter)

16) Type the next command :

fastboot boot c:\adb\recovery.img (and press enter)

17) Your Apollo will start into twrp recovery mode.
18) Make immediately a full backup (nvram, boot, data, system) into microSD.

Keep in mind that you need your pc every time you will need to enter into twrp recovery.

***************************************************************************

JUST OUT OF CURIOSITY

Try to flash (with SP Flash Tool) the next stock firmware made by me.
Before to flash it, make sure you have made a twrp full backup into microSD !

Possible stock firmware (based on OTA "full_k15ta_a-ota-1484567521.zip") :

[Only registered and activated users can see links Click here to register]

Flash it with the last next version of SP Flash Tool :

[Only registered and activated users can see links Click here to register]