[Tool] MULTIBOOT on Ecoo E04 & Lenovo K3 Note

[Cleopatra]

I have wanted it for a long time ... then a miracle occurs

BE CAREFUL : this thread is ONLY for Ecoo E04 MT6752 VIBE porting & Lenovo K3 Note original !
There are many other devices compatible with this tool. You will can download the list of all compatible devices at the next link (please open it with Notepad ++) :

[Only registered and activated users can see links Click here to register]

You will be able to switch which rom your device will have to start. That is the situation under original Lenovo K3 Note :



And that is the situation under Ecoo E04 MT6752 VIBE Lenovo K3 Note porting :



Unfortunately (under the Ecoo E04) the only compatible rom (on Needrom) is the "CyanogenMod 5.1.1" by Hacker.sss.

BE CAREFUL : this tool will works ONLY if you have installed on your device the "ECOO E04 Plus-VIBE Lenovo K3 Note porting" rom.

FOLLOW CAREFULLY THE NEXT STEPS
ABOVE ALL download and install "ECOO E04 Plus-VIBE Lenovo K3 Note porting". You will find all the steps at the next link :

[Only registered and activated users can see links Click here to register]

THEN download the MULTI.rar at the next link :

[Only registered and activated users can see links Click here to register]

It contains the "DualBootPatcherAndroid-8.0.0.r2437.gb1f9a00-snapshot.apk" and the "DualBootPatcher-8.0.0.r2437.gb1f9a00-win32.zip".
Unzip "DualBootPatcher-8.0.0.r2437.gb1f9a00-win32.zip" into your desktop. Copy the "CM12.1+ACIP+for+Ecoo+E04.zip" and paste it inside the "DualBootPatcher-8.0.0.r2437.gb1f9a00-win3" folder. Please see the next screenshot :



Click on "DualBootPatcher.exe". Please see the next screenshot :



Now you have to choose where to install the rom. The Dual Boot Patcher (now Multiboot) has the next locations :

1)Primary: normally used for installing a zip to the primary ROM (no good).
2)Secondary: it is the first multiboot installation location (no good).
3)Multi-slots: multi-slot-1, multi-slot-2, multi-slot-3. They install the rom to the cache partition (no good).
4)Data-slots: the rom wil be installed on the data partition (good).
5)Extsd-slot: the rom wil be installed on your external SD (VERY GOOD).

I suggest you to choose Extsd-slot. Please see the next screenshot :



Click on "Choose file" and select the "CM12.1.zip" inside "DualBootPatcher" folder. Please see the next screenshot :



Then click on "Start patching". Please see the next screenshot :



Be patient until "Successfully patched file" will appears. Please see the next screenshot :



NOW I suggest you to buy a good brand microSDHC Class 10 memory card (I have purchased a 128GB Class 10 memory card) and follow carefully the next thread :

[Only registered and activated users can see links Click here to register]

THEN copy the "CM12.1+ACIP+for+Ecoo+E04_extsd-slot-cyanogenmod.zip" and paste it into your external SD. Please see the next screenshot :



NOW install the "DualBootPatcherAndroid-8.0.0.r2437.gb1f9a00-snapshot.apk" on your device and tap on "ROMs". Please see the next screenshot :



Grant Superuser request. Please see the next screenshot :



Tap on "SET NOW". Please see the next screenshot :



Now you can see your primary rom. Please see the next screenshot :



Then tap on the 3 dot up right. BE CAREFUL : DO NOT TAP on "Update ramdisk". If you will tap on it your Ecoo E04 will go into bootloop ! ONLY in the original Lenovo K3 Note you will can tap on it. Please see the next screenshot :



THEN reboot your device into TWRP recovery and install the "CM12.1+ACIP+for+Ecoo+E04_extsd-slot-cyanogenmod.zip". Please see the next 2 screenshots :



When the installation process is over, reboot your device. Now you are into cyanogenmod. Please see the next screenshot :



NOW install also into cyanogenmod the "DualBootPatcherAndroid-8.0.0.r2437.gb1f9a00-snapshot.apk". Tap on "ROMs". Please see the next screenshot :



You will see this situation (do not tap "Update ramdisk"). Please see the next screenshot :



NOW THE MOST IMPORTANT THING

To flash the Xposed Framework zip (and any other flashable zip) for the roms installed into your external SD, you have to follow carefully the next steps:
1) Above all download the Xposed sdk22 arm64.zip & XposedInstaller_3.0_alpha4.apk at the next link :

[Only registered and activated users can see links Click here to register]

2) Tap "Patch Zip File". Please see the next screenshot :



3) Tap on the green square. Please see the next screenshot :



4) Tap on "SD card". Please see the next screenshot :



5) Tap on Xposed zip. Please see the next screenshot :



6) Tap on the red square (up right). Please see the next screenshot :



7) Wait until you will see "Succeeded". Please see the next screenshot :



8) You can see the xposed extsd-slot zip into your external sd. Please see the next screenshot :



9) Now reboot into TWRP recovery and install it. When the installation is over, reboot your device. Install "XposedInstaller_3.0_alpha4.apk". Please see the next screenshot :



I will post a thread about Ecoo E04 Cyanogenmod as soon as possible.
That's all ... for now

[conair]

You never stop to amaze me.

[THD]

Holly shit, this is amazing!!!!!!!!!!!!!!!!!! This is dual boot!!! I can't believe it. Well done Cleopatra. You are awesome! I 'll try it in the next days. Again well done! Congrats.

[Skyess]

Hi Cleopatra,

Really amazing multiboot ...
I have a queastion thow,
i have intsalled the cyanogen it looked just like the screenshot when it was done.
i rebooted my phone but now im seeing for over 5 minutes now the logo
Cyanogenmod Ecoo E04.
Is that normal, how long does it take till it will finally show the welcome screen so i can go on with the next steps.

greets...

the lenovo K3 is really smooth.

[Cleopatra]

Hi Cleopatra,

Really amazing multiboot ...
I have a queastion thow,
i have intsalled the cyanogen it looked just like the screenshot when it was done.
i rebooted my phone but now im seeing for over 5 minutes now the logo
Cyanogenmod Ecoo E04.
Is that normal, how long does it take till it will finally show the welcome screen so i can go on with the next steps.

greets...

the lenovo K3 is really smooth.

After 15 minutes you will begin to worry

[Skyess]

Hi Cleopatra,

Really amazing multiboot ...
I have a queastion thow,
i have intsalled the cyanogen it looked just like the screenshot when it was done.
i rebooted my phone but now im seeing for over 5 minutes now the logo
Cyanogenmod Ecoo E04.
Is that normal, how long does it take till it will finally show the welcome screen so i can go on with the next steps.

greets...

the lenovo K3 is really smooth.

After 15 minutes you will begin to worry

THen I´m worried now... Any tips on why it´s not working?

[Cleopatra]

Please tell me more about your device.
Do you have installed "ECOO E04 Plus-VIBE Lenovo K3 Note porting" at first ? Do you have followed carefully all the steps that I have suggested on my tutorial ? Do you have downloaded the Cyano version that I have suggested on my tutorial ? I have never had difficulty to install the Cyano ... and actually I have the dual boot ... and I am happy about it.

[Skyess]

Please tell me more about your device.
Do you have installed "ECOO E04 Plus-VIBE Lenovo K3 Note porting" at first ? Do you have followed carefully all the steps that I have suggested on my tutorial ? Do you have downloaded the Cyano version that I have suggested on my tutorial ? I have never had difficulty to install the Cyano ... and actually I have the dual boot ... and I am happy about it.

Hi,
Yes i installed the Ecoo e04 Vibe Porting like in your tutorial. That went like a charm everything worked great.

Yes i downloaded it directly from your link made by Hackerss.

And everything went like it should, only thing that when it said to reboot it doesnt go further then the logo...

I will try it with another sdcard to check if that´s the problem... Self i can´t thing of anything else.

[Cleopatra]

Please tell me more about your device.
Do you have installed "ECOO E04 Plus-VIBE Lenovo K3 Note porting" at first ? Do you have followed carefully all the steps that I have suggested on my tutorial ? Do you have downloaded the Cyano version that I have suggested on my tutorial ? I have never had difficulty to install the Cyano ... and actually I have the dual boot ... and I am happy about it.

Hi,
Yes i installed the Ecoo e04 Vibe Porting like in your tutorial. That went like a charm everything worked great.

Yes i downloaded it directly from your link made by Hackerss.

And everything went like it should, only thing that when it said to reboot it doesnt go further then the logo...

I will try it with another sdcard to check if that´s the problem... Self i can´t thing of anything else.

I hope for you that you flashed (by twrp) the "CM12.1+ACIP+for+Ecoo+E04_extsd-slot-cyanogenmod.zip" ... not the normal "CM12.1.zip" (on Needrom). However, the dual boot works great on my Ecoo (the screenshots on my tutorial prove it). And I hope for you that you have made a backup by twrp

[Skyess]

[/quote]
I hope for you that you flashed (by twrp) the "CM12.1+ACIP+for+Ecoo+E04_extsd-slot-cyanogenmod.zip" ... not the normal "CM12.1.zip" (on Needrom). However, the dual boot works great on my Ecoo (the screenshots on my tutorial prove it). And I hope for you that you have made a backup by twrp
[/quote]

Hahaha, Yes i made a backup ,always do . Never needed it thow till now i always succeeded with your tutorials...

Yep i flashed the extsd version with twrp..

I will start over maby i did missed one little step... we are humans afterall. ;)...