2013-11-04, 08:10
(This post was last modified: 2013-11-04, 13:21 by stevenma61.)
(2013-11-04, 01:43)kliffroger Wrote: Boss-
"!Updates_to_Recovery" has created but i have six zip files (boot, DSP, logo, recovery, system n uboot) there. Where system is the biggest one. As u said earlier [to remove lk.bin file]..where to find that file?? Pls tell me more clearly step by step the total partitioning process...sorry that our communication level is not in the same level :-(
ANd so far i have understood i dont need to use sp flash tool to do this....really glad to know that coz the usb vcom driver is really tricky...its connect n suddenly disconnect...u have to totally depend on luck... thanks for ur continuous suggestions..
if u don't see any file lk.bin, then it is fine, just copy this system.zip to yr sd card.
Power on yr phone, run the Meteos partition app, choose the size that u intend to use for the internal storage ( I recommend 2.5 gb, as yr phone is 4gb rom), saved, then boot yr phone into CWM recovery
in CWM recovery.
1 - "wipe/factory reset"
2 - "wipe cache partition"
3 - "advance", then "wipe dalvik cache"
then go back
"install zip from sd card"
then choose the system.zip that u had copied to the sd card earlier
then after finish , "reboot system now".
if it would not start after 5 minutes , stuck at the logo. then reboot into recovery, then do "wipe/factory reset" one more time, then "reboot system now".
after this, u will see yr internal storage will be changed to 2.5GB
for flashing with cable, u said it is difficult to get the device read by computer.
yes, u can only see the device for 1 to 2 sec when u connect yr phone(without the battery) to the computer
Run the sp flash tool(ver 3.1316 or ver3.1324), u chose the scatter file, then hit the button "download" , only then u connect the phone (without the battery) to the computer, then it will start to flash the rom into the phone.