[Question] (Help) How to root ainol numy note 7

[smetje]

Here is How to root: Ainol AX7 Flame phablet, also known as: Numy note 7, with MTK 6592 & Android 4.4.2 KitKat.
On Windows 8.1 system (must be en your "Local account" not in "Microsoft account" - due to ADB loading error in MTK Droid tools):

1 - [Only registered and activated users can see links Click here to register] --> extract MTK Druid tools v2.5.3 and run MTKdroidTools.exe (No need to run as administrator but make sure that your Firewals allows all instances & requests of MTKdroidTools).
2 - [Only registered and activated users can see links Click here to register] --> extract MTK SP Flash Tool v5.1352 and run flash_tool.exe (No need to run as administrator but make sure that your Firewals allows all instances & requests of flash-tool also).
3 - There is No need to install any kind of drivers, as Windows 8.1 have its owns drivers for this phablet.
4 - On your phablet "USB debugging" must be enabled - go to "Settings" --> "Developer Options" --> "USB Debugging". Plug usb cable into your phablet and your PC and tap OK on screen of phablet to allow "USB debugging", then wait few seconds.
5 - In "MTK Droid Root & Tools" you must see the informatios of phablet (Hardware: MT6592, Model: Numy_note_7 and so on).
6 - Click on "Block Map" button then on "create scatter file" button and save the file where you want (we save it in new folder which I named "SCATTER").
7 - Don't close "MTK Droid Root & Tools". Go to "Smart Phone Flash Tool" open "Download" tab, click on "Scatter-loading" and choose your scatter file.
8 - Open "Readback" tab, click on "Add" button and dubleclick on added row below.
9 - Chose to save ROM_0 where you want (in "SCATTER" folder may be), in the new pop-up box change only the Lenght row to "0x75800000" and click OK.
10 - Go to "Options" --> "Connection" and chose "USB" - "High speed" - "with battery" and close window.
10 - Now click on "Read Back" green arrow button (here is a trick - no need to shut down your phablet, which is have no removable battery).
11 - Go to "MTK Droid Root & Tools" click on "Reboot" button and chose "In recovery mode" button on pop-up box.
12 - Then you can see that "Read Back" will start in "Smart Phone Flash Tool" (with no Brom errors). If not, then just shut down a phablet --> press down & hold volume up + power buttons and wait until "Smart Phone Flash Tool" recognize it then release these two buttons.
13 - Now, when "Read Back" is finished, your phablet is down (can not power on). There is a tiny pinhole nearby power button. Take a needle and push into that hole to "reset" your device. After that you can power On your phablet.
14 - Go to "MTK Droid Root & Tools" and wait until your device is connected, then click "root, backup, recovery" tab.
15 - Click "To process file ROM_ from FlashTool" --> open ROM_0 file --> wait while it processes --> click "yes" when pop-up box with "To make CWM recovery automatically?" is shown. Wait until the end of process.
16 - Go to "MtkDroidTools" folder --> "backups" folder --> "Numy_note_7_..._ForFlashtoolFromReadBack_..." folder. Here create a new folder, name it "Patch" or whatever and copy-paste into 3 files: "MT6592_Android_scatter.txt", "Numy_note_7_...__recovery_...img"(rename this to "recovery.img") and "Numy_note_7_...__boot_patched_...img"(rename this to "boot.img") --> Thanks to "Rey69" for this trick.
17 - Go to "Smart Phone Flash Tool" --> click on "Download" tab --> load scatter file from "Patch" folder --> click "Download" green arrow button.
18 - Repeat step 11 & 12 & 13 & 14.
19 - Click on "SuperUser" button --> chose "SuperSu" on pop-up box --> aaaannnnnd nooooooo it's not done yet. At this point you have only root at "ADB terminal" within "MTK Droid Root & Tools". You have SuperSu application installed on your phablet but there is an error (no binary.su). To have a real root, two more steps:
20 - First check your date&time on your phablet and corrects if necessary. [Only registered and activated users can see links Click here to register] "UPDATE-SuperSU-v2.16.zip" on your phablet or your PC and paste it onto your phablet "Download" folder --> internal sdcard (sdcard0).
21 - Now repeat step 11 --> wait for reboot --> you are in CWM recovery on your phablet --> take a magnifying glass (there is a tiny font) --> with volume-down button select "install zip from sdcard" (2nd row) --> push power button (stand for OK) --> "chose zip from internal sdcard" (5th row) - OK --> select "Download" folder - OK --> select "UPDATE-SuperSU-v2.16.zip"- OK --> wait until the end of process (flashing a zip file) --> select "reboot system now" AND There we go "Congratulation you have a ROOT acces".
Now you can (YesWeCan) install free "NextApp SDFix" application from play store to have a fully acces to your external sdcard (sdcard1) to break down Google Android KitKat restriction for that external sdcard. Sorry for my English.