Need restore IMEI, but MTK Droid Tools dont works

[Belinda]

Hi guys. I have problems to restore my IMEI with MTK Droid Tools.
Is all right until pulse "replace IMEI" then appears these lines:

--- ERROR: dev/radio/pttycmd1 inaccessible, Should be Root Shell
--- ERROR: NOT pttycmd1 device found!

I have UMI X1S MT6589

Please help me. My English is very poor. I wrote this with the help of Google translator.

[GizBeat]

Try rooting the phone first. See Gizbeat 101: Root Process thread.

[Belinda]

Try rooting the phone first. See Gizbeat 101: Root Process thread.

OK, Shell Root is not = normal root xD
I do that you say. The little vox in Green. I pulse “replace IMEI”, write the two new IMEIS (I only udes one SIM) and the program says: “Changes will come into force after reset”. Then I restart my phone, but the problem continued.
Reset=restart???

Thanks!!!

[GizBeat]

Try rooting the phone first. See Gizbeat 101: Root Process thread.

OK, Shell Root is not = normal root xD

I do that you say. The little vox in green. I pulse “replace IMEI”, write the two new IMEIS (I only udes one SIM) and the program says: “Changes will come into force after reset”.

Then I restart my phone, but the problem continued.

Reset=restart???

Thanks!!!

Yes, reset should mean restart. What do you mean the problem continued? Is the IMEI changed after your restarted?

[Belinda]

Yes, reset should mean restart. What do you mean the problem continued? Is the IMEI changed after your restarted?

No is not changed. Still "unknown"

[GizBeat]

Try this

[Only registered and activated users can see links Click here to register]

1. Run DOS.CMD
2. Within DOS, go to the directory of the extracted executable
3. Type: imei.exe IMEI1 IMEI2
4. This will create "MP0B_001_NEW"
5. Change the name to "MP0B_001" and copy to your SD
6. Open ES Explorer (or similar app) and make sure /system is mounted as writable (see settings in ES Explorer)
7. Navigate to /data/nvram/md/NVRAM/NVD_IMEI/
8. Find and rename original MP0B_001 to MP0B_001.bak AND copy to your SD
9. Copy the new MB0B_001 from step 3 to /data/nvram/md/NVRAM/NVD_IMEI/
10. Restart your phone

[Belinda]

I do all your instrucctions but with app root explorer.
I restart, but still the problem.

I want to tell you that I have tried this method and a lot before.

I tried with mobileuncle, I tried with ingenier mode, with the commands: AT+EGMR=1,7,"IMEI 1", so, I thought MTK Droid Tool is the solution, but no.

Don’t worry, I think my phone is broken definitely

Thanks for all.

---

I think that all changes that I make in the system, are remove when I restart phone.

[pontari]

Format Nvram!!
Flash Stock Firmware and restore IMEI.

YOUR Phone is not broken

[Belinda]

Format Nvram!!
Flash Stock Firmware and restore IMEI.

YOUR Phone is not broken

Thanks! But I not expert , how to format Nvram?? And Flash Stock Firmware is the same than install a Offial Rom??

[pontari]

[Only registered and activated users can see links Click here to register]

Here is a pdf which describes is how to format the Nvram and flashes a new stock firmware.
Yes, the stock firmware is the original firmware for your phone! The earlier you get there you have to format after it's all gone!!
When the stock firmware to flash the hook in Preloder make out! Ignore the error message.

SpFlashtool and drivers available here on the board.