Posts: 3
Threads: 1
Joined: 2017-07-01
Points:
77
Reputation: +0
HI to all,
i tried to flash IT with some MTK 6753 frimware (not the original one )
in the flash process i stop it because i get just 1% progress after 20 min
now i can't boot my phone or even conect it to the computer .... nothing even when i blug it to the charge cable!!!
I will be very thankful if any one can tel WHAT CAN I DO NOW?
Posts: 3
Threads: 1
Joined: 2017-04-22
Points:
92
Reputation: +2
hi
when same happened to me,
prereq:
- rooted phone/tab , debug option on
- downloaded/install android studio, adb sdk tools on pc
- downloaded flash tool specific to device and rom
- downloaded a custom rom for the device on pc and unzip it.
- googled / checked few tutorials on youtube
1. phone/tab must be charged to at least 50% (can be done via external power supply 5v dc using clamps or pins)
2. disconnected the battery - if is a tablet cut the ground (usually black) cable and reconnect it.
3. press/hold volume/up or down TOGETHER with power button till screen shows something. (usually a dead drone and 3 lines recovery, fastboot, reboot)
4. enter recovery and delete user cache or do a full factory restore.
5. connect phone/tab to pc and check adb can recognize the device
using command : adb devices and preesing enter
if all ok you'll see on pc : device name 1234567890abcdef or similar.
6. from here proceed according to tutorials to flash the custom rom
good luck
evangel
Posts: 3
Threads: 1
Joined: 2017-07-01
Points:
77
Reputation: +0
hi
need rom pls i don't have rom
Posts: 3
Threads: 1
Joined: 2017-04-22
Points:
92
Reputation: +2
hi
you need to search this site or "google it" with your model.