[Tutorial] CWM and Root tutorial for Hero H7500+ / ZP800H / ZP810 / MX56

[aliravian]

Finally, I was able to get my h7500+ ZP810 mobile recognized by win7 64 bit machine. I used PdaNET ADB VCOM drivers for MTK6589 for this mobile. when I connect the mobile in OFF state while, port appears for a few seconds only in device manager, and then disappears. but during the same time it is recognized by SP FLASH tool, and it starts loading the ROM / recovery image. I did put my mobile in MPT mode , before switching off. and after than switched off my mobile. removed battery for few seconds, pressed DOWNLOAD button from SP flash tool, and then placed battery in mobile and then plugged the USB cable. then in device manager , under port senction VCOM port appeared and then disappeared, but at the same time SP FLash tool picked the phone at COM port and it started working.

Hurry , it is working now.

[rakovm]

Hello, the second link doesnt work again, can you check?

[NexusTrix]

Hello Rakovm,

This is an ancient thread. What exactly are you trying to do?

[italobass]

Hi,
I am trying to download gizbeat combo zip but when I click on it, it takes me to a chinese website and I cannot read chinese!!! don't know where to click to download!!!

[Athos]

italobass, the link no longer leads to the content. I believe it has gotten outdated, and therefore removed. What are you hoping to get from the combo?

1. There is an updated ADB Driver pack you can get from here [Only registered and activated users can see links Click here to register], as well as a newer version of SP Flash Tool.
2. See tutorials forum for building your own CWM.
3. Superuser [Only registered and activated users can see links Click here to register]

[etstudio]

i have lenovo vodafone smart pad III 10"
I need twrp for heam.Fabrik Firmware is brouken and i dont put in them superSU,and i will be tray relash them, but not how it.i see on this post some links but i dont have account on this chinese site and plesase mirror on difrent site.thancs greeting