Posts: 379
Threads: 11
Joined: 2014-04-17
Points:
5,169
Reputation: +386
I would (personally) attempt to get recovery back on the phone..
The TWRP or CM or "whatever" you can get on it, and go from there. Get yourself back to where you can flash ROMs easily from an SD card, at a minimum.
As an aside, have (or did) you attempt to use the reset button behind SIM1?? If so, what happened?
Posts: 3
Threads: 1
Joined: 2015-01-18
Points:
72
Reputation: +3
2015-01-31, 06:21
(This post was last modified: 2015-01-31, 06:33 by pfleiderer.)
Hi again.
Yes, I have tried the reset button an I also flashed TWRP recovery for this phone (got it from needrom.com).
The flash from Flashtool was finished with the green OK, but the screen was still just black. No chance to start into recovery.
The phone was recognised by the pc, but everything I tried to flash (recovery / stock rom) goes well, but has no effect at all.
Any new ideas? I feel sad and ? helpless
Hi again.
Yes, I tried the red reset button several times. Unfortunate with no effect at all.
I also flashed the stock rom...
... The TWRP recovery for this phone (got it from needrom.com)
The flashing was always ended with the green OK ? sign in Flashtool,
but the screen still is just black... even if I press power on, or power plus vol- to start into recovery mode.
Any new ideas?
I would be so thankful
You like this post
Posts: 379
Threads: 11
Joined: 2014-04-17
Points:
5,169
Reputation: +386
So, to be specific:
The device is on and this is proven when you connect SPFlashtool. That is good!
Remember that (to my knowledge) the "reset button" pressed is simply the same as having the battery removed. Once the reset button is released, it is like reinserting the battery.
You can give this a shot:
Once you have gotten to the point of loading the scatterfile and pressed the download button (without the USB cable connected) - Press and hold the red reset button while pressing and holding the volume up (+) button. Do not let go. NOW you may connect the USB cable in the the normal flashing procedure.
I realize that you may need an extra hand to try this, but it is worth a try.
I suppose that what I really need is your EXACT procedure - each and every button pressed, what software, what options are checked/not checked on the software, when you are either connecting or disconnecting the USB cable, and any software errors or successes.
You and
pfleiderer like this post